- New
ITALKIT Big End Thrust Washer 25x41x1 mm
€5.00
Tax Included
Big end thrust washers sit on each side of the connecting rod to set its side clearance on the crankshaft.
ITALKIT 25x41x1 mm big end thrust washer.
The ITALKIT 25x41x1 mm AB.25.41.10 big end thrust washer is a universal part. Big end thrust washers sit on each side of the connecting rod, between the rod and the crank flywheels. They set the rod's side clearance and stop it rubbing against the flywheels. They are replaced with the rod when a crankshaft is rebuilt.
Specifications
- Brand: ITALKIT
- Manufacturer part number: AB.25.41.10
When to replace it?
- Marked, grooved or blued washers on teardown.
- Rod side clearance out of tolerance.
- Rubbing marks on the crank flywheels.
At every connecting rod or crankpin replacement.
Fitting tips
- Measure the old washers (inside diameter, outside diameter and thickness) before ordering.
- Oil the washers before placing them on each side of the rod.
- After assembling the crankshaft, check the rod's side clearance with a feeler gauge.
Why ITALKIT?
ITALKIT is a Spanish manufacturer of engine parts for small-displacement machines: cylinders, pistons, crankshafts, reed valves and spare parts in several sizes. The brand is very active in 50cc racing, especially in Spain.
Frequently asked questions
How do I choose?
By the three dimensions: inside diameter, outside diameter and thickness, given in the title.
Compatibility
Universal part: check the dimensions given before ordering.
No customer reviews for the moment.
Big end thrust washers sit on each side of the connecting rod to set its side clearance on the crankshaft.
ITALKIT 25x41x1 mm big end thrust washer.
ITALKIT Big End Thrust Washer 25x41x1 mm
€5.00
Tax Included