HOT RODS connecting rod kit for KTM SX 85 and HUSQVARNA TC 85 from 2013 to 2017

HOT RODS offers this connecting rod kit for KTM SX 85 and HUSQVARNA TC 85 from 2013 to 2017. The rod passes the piston’s motion to the crankshaft. Its big-end bearing spins at very high revs and eventually develops play.

Why replace the connecting rod?

The benefits:

• Remove the play that causes noise and vibration.
• Make a high-hours engine reliable again.
• Cheaper than a complete crankshaft when the flywheels are good.

Why choose HOT RODS?

Hot Rods crankshafts come assembled and trued: double-forged 8620 steel rod and hardened crankpin (58-62 HRC), a ready-to-fit bottom-end rebuild.

When should you replace the connecting rod?

Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

Specifications and fitting tips

• Contents: Connecting Rod, Crank Pin, Crank Pin Bearing, Wrist Pin Bearing, Thrust Washers
• Displacement: 85 cm³
• Material: 8620 steel
• Engine: 2-stroke
• Heavy-duty OE replacement connecting rods
• Certified AISI 8620 steel for superior strength

Cross-Mania tip: Fitting requires a press and truing the crankshaft with a dial gauge. If you are not equipped, have it done by a workshop.

Also needed with this part

• Crankshaft bearings and seals : see the selection
• Complete engine gasket kit : ATHENA · CENTAURO
• Piston : PROX · ATHENA
• 2-stroke oil : LIQUI MOLY 1 L 3065 · LIQUI MOLY 1 L 3063

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA TC 85 2017
HUSQVARNA TC 85 2016
KTM SX 85 2017
KTM SX 85 2016
KTM SX 85 2015
KTM SX 85 2014
KTM SX 85 2013