Connecting rod HOT RODS for KTM EXC, SX, MX 250, 300 from 1984 to 2003

HOT RODS offers you this complete connecting rod kit for your KTM EXC 250cc, KTM GS 250cc, KTM SX 250cc, KTM EXC 300cc, KTM GS 300cc, KTM MX 300cc. This complete package will allow you to refurbish your crankshaft that may have some play from top to bottom. Rather than changing the complete crankshaft, you will often just have to change the connecting rod. This connecting rod is a cast model sold with its needle cage, its anti-friction shims and its crank pin. It has the same original dimensions. No adaptation is necessary. To change a connecting rod, you will need a press, a balancing bench and a little patience. If you don't have the material to do that, you can send us your crankshaft so that we can do the assembly ourselves. You can contact us first by e-mail to get a quote. All dimensions of the connecting rod are given below.

Big End I.D. rod: 31mm

Width of connecting rod head: 16.900mm

Center to Center Connecting Rod: 132mm

Small end connecting rod I.D.: 22mm

Connecting rod width: 16.900mm

Engine type: 2 stroke

Includes connecting rod, crank, crank bearing, wrist bearing and thrust washers

Spindle length: 59.900mm

EP washer: 1mm

Fits on :

KTM 250 EXC 1999

KTM 250 EXC 1998

KTM 250 EXC 1997

KTM 250 EXC 1996

KTM 250 EXC 1995

KTM 250 EXC 1994

KTM 250 GS 1992

KTM 250 GS 1991

KTM 250 GS 1990

KTM 250 GS 1989

KTM 250 GS 1988

KTM 250 GS 1987

KTM 250 GS 1986

KTM 250 GS 1985

KTM 250 GS 1984

KTM 250 SX 1999

KTM 250 SX 1998

KTM 250 SX 1997

KTM 250 SX 1996

KTM 250 SX 1995

KTM 250 SX 1994

KTM 300 EXC M/O SIX DAYS 1996

KTM 300 EXC M/O 1997

KTM 300 EXC M/O 1996

KTM 300 EXC SIX DAYS 2003

KTM 300 EXC SIX DAYS 2002

KTM 300 EXC SIX DAYS 2001

KTM 300 EXC 2003

KTM 300 EXC 2002

KTM 300 EXC 2001

KTM 300 EXC 2000

KTM 300 EXC 1999

KTM 300 EXC 1998

KTM 300 GS 1992

KTM 300 GS 1991

KTM 300 GS 1990

KTM 300 MX 1994

KTM 300 MX 1993

KTM 300 MX 1992

KTM 300 MX 1991

KTM 300 MX 1990