HOT RODS offers you this complete connecting rod kit for your KTM EXC 125cc and KTM SX 125cc. This complete package will allow you to refurbish your crankshaft that may have some play from top to bottom. Rather than changing the complete crankshaft, you will often just need to change the connecting rod. This connecting rod is a cast model sold with its needle cage, its anti-friction shims and its crank pin. It has the same original dimensions. No adaptation is necessary. To change a connecting rod, you will need a press, a balancing bench and a little patience. If you don't have the material to do that, you can send us your crankshaft so that we can do the assembly ourselves. You can contact us first by e-mail to get a quote. All the dimensions of the connecting rod are given below.

Technical data :

Big End I.D. connecting rod: 28mm

Width of connecting rod head: 15.900mm

Center to Center Connecting Rod: 110mm

Small end connecting rod I.D.: 19mm

Connecting rod width: 17.900mm

Engine type: 2 stroke

Includes connecting rod, crank, crank bearing, wrist bearing and thrust washers

Spindle length: 54.800mm

EP washer: 1mm

Fits on :

KTM 125 EXC SIX DAYS 2006

KTM 125 EXC SIX DAYS 2005

KTM 125 EXC SIX DAYS 2004

KTM 125 EXC SIX DAYS 2003

KTM 125 EXC SIX DAYS 2002

KTM 125 EXC SIX DAYS 2001

KTM 125 EXC SIX DAYS 2000

KTM 125 EXC SIX DAYS 1999

KTM 125 EXC SIX DAYS 1998

KTM 125 EXC 2006

KTM 125 EXC 2005

KTM 125 EXC 2004

KTM 125 EXC 2003

KTM 125 EXC 2002

KTM 125 EXC 2001

KTM 125 EXC 2000

KTM 125 EXC 1999

KTM 125 EXC 1998

KTM 125 SX FACTORY EDITION TYLA RATTRAY 2005

KTM 125 SX 2006

KTM 125 SX 2005

KTM 125 SX 2004

KTM 125 SX 2003

KTM 125 SX 2002

KTM 125 SX 2001

KTM 125 SX 2000

KTM 125 SX 1999

KTM 125 SX 1998