PROX offers you this complete connecting rod kit for your KTM 350SX-F and KTM 350EXC-F. This complete package will enable you to refurbish your crankshaft, which may have some play from top to bottom. Rather than replacing the entire crankshaft, you'll often just need to change the connecting rod. This connecting rod is a cast model sold complete with needle cage, anti-friction shims and crank pin. It has the same original dimensions. No adaptation is required. To change a connecting rod, you'll need a press, a balancing bench and a little patience. If you don't have the equipment to do this, you can send us your crankshaft so we can do the fitting ourselves. You can also e-mail us for a quote. All connecting rod dimensions are given below.

Technical data :

Center distance (mm) : 102

Short side bore (mm): 18

Connecting rod head bore (mm): 40

Bore width short side (mm): 16.90

Connecting-rod bore width (mm): 19.90

Crankpin Ø (mm): 32

Crankpin length (mm): 59.9

Short-side bearing (mm) :

Connecting rod head bearing (mm) :

Washers (mm): No

Fits on :

HUSABERG FE 350 2014

HUSABERG FE 350 2013

KTM 350 EXC-F SIX DAYS 2013

KTM 350 EXC-F SIX DAYS 2012

KTM 350 EXC-F 2013

KTM 350 EXC-F 2012

KTM 350 SX-F FACTORY EDITION ANTONIO CAIROLI 2012

KTM 350 SX-F FACTORY EDITION ANTONIO CAIROLI 2011

KTM 350 SX-F 2012

KTM 350 SX-F 2011

KTM FREERIDE 350 2017

KTM FREERIDE 350 2016

KTM FREERIDE 350 2015

KTM FREERIDE 350 2014

KTM FREERIDE 350 2013

KTM FREERIDE 350 2012