PROX offers you this complete connecting rod kit for your KTM 250SX-F and KTM 250EXC-F. This complete package will enable you to refurbish your crankshaft, which may have some play from top to bottom. Rather than replacing the entire crankshaft, you'll often just need to change the connecting rod. This connecting rod is a cast model sold complete with needle cage, anti-friction shims and crankpin. It has the same original dimensions. No adaptation is required. To change a connecting rod, you'll need a press, a balancing bench and a little patience. If you don't have the equipment to do this, you can send us your crankshaft so we can do the fitting ourselves. You can also e-mail us for a quote. All connecting rod dimensions are given below.

Technical data :

Center distance (mm) : 98

Short side bore (mm): 16

Connecting rod head bore (mm): 38

Small-side bore width (mm): 17.9

Connecting-rod bore width (mm): 17.9

Crankpin Ø (mm): 30

Crankpin length (mm): 53.6

Short-side bearing (mm) :

Connecting rod head bearing (mm) :

Washers (mm): No

Fits on :

HUSABERG FE 250 2013

KTM 250 EXC-F FACTORY EDITION 2011

KTM 250 EXC-F FACTORY EDITION 2010

KTM 250 EXC-F SIX DAYS 2013

KTM 250 EXC-F SIX DAYS 2012

KTM 250 EXC-F SIX DAYS 2011

KTM 250 EXC-F SIX DAYS 2010

KTM 250 EXC-F SIX DAYS 2009

KTM 250 EXC-F SIX DAYS 2008

KTM 250 EXC-F SIX DAYS 2007

KTM 250 EXC-F 2013

KTM 250 EXC-F 2012

KTM 250 EXC-F 2011

KTM 250 EXC-F 2010

KTM 250 EXC-F 2009

KTM 250 EXC-F 2008

KTM 250 EXC-F 2007

KTM 250 SX-F FACTORY EDITION KEN ROCZEN 2012

KTM 250 SX-F FACTORY EDITION MARVIN MUSQUIN 2011

KTM 250 SX-F FACTORY EDITION MARVIN MUSQUIN 2010

KTM 250 SX-F 2012

KTM 250 SX-F 2011

KTM 250 SX-F 2010

KTM 250 SX-F 2009

KTM 250 SX-F 2008

KTM 250 SX-F 2007

KTM 250 SX-F 2006