- New
VINTCO connecting rod kit for HUSQVARNA CR 450, RT 360, WR 450 from 1972 to 1975
€258.90
Tax Included
The connecting rod links the piston to the crankshaft: this kit replaces it with its crank pin and bearing for a bottom-end rebuild.
VINTCO offers this connecting rod kit for HUSQVARNA CR 450, RT 360, WR 450 from 1972 to 1975. The rod passes the piston’s motion to the crankshaft. Its big-end bearing spins at very high revs and eventually develops play.
Why replace the connecting rod?
The benefits:
- Remove the play that causes noise and vibration.
- Make a high-hours engine reliable again.
- Cheaper than a complete crankshaft when the flywheels are good.
Why choose VINTCO?
Vintco rods are reinforced forged steel and come with big-end and small-end bearings and washers: a complete rebuild for a vintage two-stroke.
When should you replace the connecting rod on your HUSQVARNA CR 450?
Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.
The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.
Specifications and fitting tips
- Contents: 1 x Heavy Duty Forged Steel Connecting Rod, 1 x Crank Pin: 12 mm x 28 mm x 57 mm, 1 x Big End Bearing: 25 mm x 35 mm x 16 mm, 1 x Wrist Pin Bearing: 20 mm x 24 mm x 23 mm
- Material: Forged steel
- Style: Heavy duty
- Heavy-duty forged connecting rods for OEM-equal or better fit and performance
- Improved oil slots for better bearing lubrication
Cross-Mania tip: Fitting requires a press and truing the crankshaft with a dial gauge. If you are not equipped, have it done by a workshop.
Also needed with this part
- Crankshaft bearings and seals : see the selection
- Complete engine gasket kit : see the selection
- Piston : see the selection
- 2-stroke oil : LIQUI MOLY 1 L 3065 · LIQUI MOLY 1 L 3063
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
HUSQVARNA CR 450 1975
HUSQVARNA CR 450 1974
HUSQVARNA CR 450 1973
HUSQVARNA CR 450 1972
HUSQVARNA RT 360 1975
HUSQVARNA RT 360 1974
HUSQVARNA RT 360 1973
HUSQVARNA WR 450 1975
HUSQVARNA WR 450 1974
HUSQVARNA WR 450 1973
HUSQVARNA WR 450 1972
KR2025
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The connecting rod links the piston to the crankshaft: this kit replaces it with its crank pin and bearing for a bottom-end rebuild.
VINTCO connecting rod kit for HUSQVARNA CR 450, RT 360, WR 450 from 1972 to 1975
€258.90
Tax Included