• New
    PROX Crankshaft Bearing 25x55x15mm for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007
    PROX Crankshaft Bearing 25x55x15mm for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007

    PROX Crankshaft Bearing 25x55x15mm for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007

    Review (0)
    €41.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      PROX offers this engine bearing for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings on your YAMAHA YFS 200 BLASTER 2WD?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Manufacturer part number: 23.83A915

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA IT 200 1986
      YAMAHA IT 200 1985
      YAMAHA IT 200 1984
      YAMAHA TDR 125 1992
      YAMAHA TDR 125 1991
      YAMAHA TDR 125 1990
      YAMAHA TDR 125 1989
      YAMAHA TZR 125 1992
      YAMAHA TZR 125 1991
      YAMAHA TZR 125 1990
      YAMAHA TZR 125 1989
      YAMAHA TZR 125 1988
      YAMAHA TZR 125 1987
      YAMAHA YFS 200 BLASTER 2WD 2007
      YAMAHA YFS 200 BLASTER 2WD 2006
      YAMAHA YFS 200 BLASTER 2WD 2005
      YAMAHA YFS 200 BLASTER 2WD 2004
      YAMAHA YFS 200 BLASTER 2WD 2003
      YAMAHA YFS 200 BLASTER 2WD 2002
      YAMAHA YFS 200 BLASTER 2WD 2001
      YAMAHA YFS 200 BLASTER 2WD 2000
      YAMAHA YFS 200 BLASTER 2WD 1999
      YAMAHA YFS 200 BLASTER 2WD 1998
      YAMAHA YFS 200 BLASTER 2WD 1997
      YAMAHA YFS 200 BLASTER 2WD 1996
      YAMAHA YFS 200 BLASTER 2WD 1995
      YAMAHA YFS 200 BLASTER 2WD 1994
      YAMAHA YFS 200 BLASTER 2WD 1993
      YAMAHA YFS 200 BLASTER 2WD 1992
      YAMAHA YFS 200 BLASTER 2WD 1991
      YAMAHA YFS 200 BLASTER 2WD 1990

      PROX
      23.83A915
      3 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Crankshaft Bearing 25x55x15mm for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007
      PROX Crankshaft Bearing 25x55x15mm for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007
      PROX Crankshaft Bearing 25x55x15mm for YAMAHA IT 200, TDR 125, TZR 125, YFS 200 BLASTER 2WD 1984-2007
      €41.90
      Tax Included