• New
    PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010
    PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010

    PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010

    Review (0)
    €41.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

    Wishlist
    Write your review

      PROX offers this engine bearing for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings on your YAMAHA YFZ 350 BANSHEE 2WD?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Manufacturer part number: 23.83406

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA YFZ 350 BANSHEE 2WD 2010
      YAMAHA YFZ 350 BANSHEE 2WD 2009
      YAMAHA YFZ 350 BANSHEE 2WD 2008
      YAMAHA YFZ 350 BANSHEE 2WD 2007
      YAMAHA YFZ 350 BANSHEE 2WD 2006
      YAMAHA YFZ 350 BANSHEE 2WD 2005
      YAMAHA YFZ 350 BANSHEE 2WD 2004
      YAMAHA YFZ 350 BANSHEE 2WD 2003
      YAMAHA YFZ 350 BANSHEE 2WD 2002
      YAMAHA YFZ 350 BANSHEE 2WD 2001
      YAMAHA YFZ 350 BANSHEE 2WD 2000
      YAMAHA YFZ 350 BANSHEE 2WD 1999
      YAMAHA YFZ 350 BANSHEE 2WD 1998
      YAMAHA YFZ 350 BANSHEE 2WD 1997
      YAMAHA YFZ 350 BANSHEE 2WD 1996
      YAMAHA YFZ 350 BANSHEE 2WD 1995
      YAMAHA YFZ 350 BANSHEE 2WD 1994
      YAMAHA YFZ 350 BANSHEE 2WD 1993
      YAMAHA YFZ 350 BANSHEE 2WD 1992
      YAMAHA YFZ 350 BANSHEE 2WD 1991
      YAMAHA YFZ 350 BANSHEE 2WD 1990
      YAMAHA YFZ 350 BANSHEE 2WD 1989
      YAMAHA YFZ 350 BANSHEE 2WD 1988

      PROX
      23.83406

      Specific References

      Write your review

      No customer reviews for the moment.

      Write your review
      PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010
      PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010
      PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010
      PROX Crankshaft Bearing 25x62x17mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2010
      €41.90
      Tax Included