• New
    PROX engine bearing 6305 C3 – 25 × 62 × 17 mm for YAMAHA TT 600, SUZUKI RM 250
    PROX engine bearing 6305 C3 – 25 × 62 × 17 mm for YAMAHA TT 600, SUZUKI RM 250

    PROX engine bearing 6305 C3 – 25 × 62 × 17 mm for YAMAHA TT 600, SUZUKI RM 250

    Review (0)
    €16.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6305 C3 – 25 × 62 × 17 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Bearing: 6305 C3
      • Dimensions (inner × outer × width): 25 × 62 × 17 mm

      PROX offers this engine bearing for YAMAHA TT 600, SUZUKI RM 250, TM RACING EN 125 and KAWASAKI KX 125 E from 1982 to 2014. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Crankshaft
      • ProX bearings are made in major bearing manufacturers' factories, mainly in Japan
      • All bearings are made to OEM specifications for optimum quality and performance

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KX 125 D 1985
      KAWASAKI KX 125 E 1987
      KAWASAKI KX 125 E 1986
      SUZUKI RM 250 1993
      SUZUKI RM 250 1992
      SUZUKI RM 250 1991
      SUZUKI RM 250 1990
      SUZUKI RM 250 1989
      SUZUKI RM 250 1988
      SUZUKI RM 250 1987
      SUZUKI RM 250 1986
      SUZUKI RM 250 1985
      SUZUKI RM 250 1984
      SUZUKI RM 250 1983
      SUZUKI RM 250 1982
      TM RACING EN 125 2014
      TM RACING EN 125 2013
      TM RACING EN 144 2014
      TM RACING EN 144 2013
      TM RACING MX 125 2014
      TM RACING MX 125 2013
      TM RACING MX 144 2014
      TM RACING MX 144 2013
      YAMAHA TT 600 1991
      YAMAHA TT 600 1990
      YAMAHA TT 600 1989
      YAMAHA TT 600 1988
      YAMAHA TT 600 1987
      YAMAHA TT 600 1986
      YAMAHA TT 600 1985
      YAMAHA TT 600 1984
      YAMAHA XT 600 1990
      YAMAHA XT 600 1989
      YAMAHA XT 600 1988
      YAMAHA XT 600 1987
      YAMAHA XT 600 1986
      YAMAHA XT 600 1985
      YAMAHA XT 600 1984

      PROX
      23.6305C3
      15 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX engine bearing 6305 C3 – 25 × 62 × 17 mm for YAMAHA TT 600, SUZUKI RM 250
      PROX engine bearing for YAMAHA TT 600, SUZUKI RM 250, TM RACING EN 125 and KAWASAKI KX 125 E from 1982 to 2014
      PROX engine bearing 6305 C3 – 25 × 62 × 17 mm for YAMAHA TT 600, SUZUKI RM 250
      €16.90
      Tax Included