• New
    ATHENA engine bearing 6205 C3 – 25 × 52 × 15 mm for YAMAHA YZ 125, KAWASAKI KE 175
    ATHENA engine bearing 6205 C3 – 25 × 52 × 15 mm for YAMAHA YZ 125, KAWASAKI KE 175
    ATHENA engine bearing 6205 C3 – 25 × 52 × 15 mm for YAMAHA YZ 125, KAWASAKI KE 175

    ATHENA engine bearing 6205 C3 – 25 × 52 × 15 mm for YAMAHA YZ 125, KAWASAKI KE 175

    Review (0)
    €11.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6205 C3 – 25 × 52 × 15 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Bearing: 6205 C3
      • Dimensions (inner × outer × width): 25 × 52 × 15 mm

      ATHENA offers this engine bearing for YAMAHA YZ 125, KAWASAKI KE 175, HUSQVARNA WR 240 and SUZUKI PE 175 from 1971 to 2006. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, the Italian manufacturer founded in 1973, is an original-equipment supplier to manufacturers such as KTM and Ducati: the same standards for your replacement parts.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Engine
      • Material: Stainless steel
      • Electric Motor Quality (EMQ): tight tolerances for a quiet, vibration-free bearing

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA CR 250 R 1984
      HUSQVARNA AE 500 1984
      HUSQVARNA CR 240 1985
      HUSQVARNA CR 240 1984
      HUSQVARNA CR 250 1985
      HUSQVARNA CR 250 1984
      HUSQVARNA CR 500 1985
      HUSQVARNA CR 500 1984
      HUSQVARNA WR 240 1988
      HUSQVARNA WR 240 1985
      HUSQVARNA WR 240 1984
      HUSQVARNA XC 250 1985
      HUSQVARNA XC 250 1984
      HUSQVARNA XC 500 1985
      HUSQVARNA XC 500 1984
      KAWASAKI F6 125 1973
      KAWASAKI F6 125 1972
      KAWASAKI F6 125 1971
      KAWASAKI F7 175 1975
      KAWASAKI F7 175 1974
      KAWASAKI F7 175 1973
      KAWASAKI F7 175 1972
      KAWASAKI F7 175 1971
      KAWASAKI KD 175 1978
      KAWASAKI KD 175 1977
      KAWASAKI KD 175 1976
      KAWASAKI KD 80 N 1990
      KAWASAKI KD 80 N 1989
      KAWASAKI KD 80 N 1988
      KAWASAKI KDX 175 1982
      KAWASAKI KDX 175 1981
      KAWASAKI KDX 175 1980
      KAWASAKI KE 175 1983
      KAWASAKI KE 175 1982
      KAWASAKI KE 175 1981
      KAWASAKI KE 175 1980
      KAWASAKI KE 175 1978
      KAWASAKI KE 175 1977
      KAWASAKI KE 175 1976
      SUZUKI PE 175 1984
      SUZUKI PE 175 1983
      SUZUKI PE 175 1982
      SUZUKI PE 175 1981
      SUZUKI PE 175 1980
      SUZUKI PE 175 1979
      SUZUKI PE 175 1978
      SUZUKI RS 175 1982
      SUZUKI RS 175 1981
      SUZUKI RS 175 1980
      YAMAHA DT 125 LC 1987
      YAMAHA DT 125 LC 1986
      YAMAHA DT 125 MX 1987
      YAMAHA DT 125 MX 1986
      YAMAHA DT 125 R 1997
      YAMAHA DT 125 RE 1997
      YAMAHA DT 125 RE MX 2006
      YAMAHA IT 125 1981
      YAMAHA IT 125 1980
      YAMAHA YZ 100 1983
      YAMAHA YZ 100 1982
      YAMAHA YZ 100 1981
      YAMAHA YZ 100 1980
      YAMAHA YZ 100 1979
      YAMAHA YZ 100 1978
      YAMAHA YZ 100 1977
      YAMAHA YZ 100 1976
      YAMAHA YZ 125 1985
      YAMAHA YZ 125 1984
      YAMAHA YZ 125 1983
      YAMAHA YZ 125 1982
      YAMAHA YZ 125 1981
      YAMAHA YZ 125 1980
      YAMAHA YZ 125 1979
      YAMAHA YZ 125 1978
      YAMAHA YZ 125 1977
      YAMAHA YZ 175 1976

      ATHENA
      MS250520150C3
      11 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA engine bearing 6205 C3 – 25 × 52 × 15 mm for YAMAHA YZ 125, KAWASAKI KE 175
      ATHENA engine bearing for YAMAHA YZ 125, KAWASAKI KE 175, HUSQVARNA WR 240 and SUZUKI PE 175 from 1971 to 2006
      ATHENA engine bearing 6205 C3 – 25 × 52 × 15 mm for YAMAHA YZ 125, KAWASAKI KE 175
      €11.90
      Tax Included