• New
    ATHENA engine bearing 6204 C3 – 20 × 47 × 14 mm for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M
    ATHENA engine bearing 6204 C3 – 20 × 47 × 14 mm for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M

    ATHENA engine bearing 6204 C3 – 20 × 47 × 14 mm for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M

    Review (0)
    €7.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6204 C3 – 20 × 47 × 14 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Bearing: 6204 C3
      • Dimensions (inner × outer × width): 20 × 47 × 14 mm

      ATHENA offers this engine bearing for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M, KX 80 from 1974 to 2004. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, the Italian manufacturer founded in 1973, is an original-equipment supplier to manufacturers such as KTM and Ducati: the same standards for your replacement parts.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Engine
      • Outside diameter: 47 mm
      • Inside diameter: 20 mm
      • Thickness: 14 mm
      • Material: Stainless steel
      • Electric Motor Quality (EMQ): tight tolerances for a quiet, vibration-free bearing

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KD 80 A 1976
      KAWASAKI KD 80 A 1975
      KAWASAKI KD 80 M 1987
      KAWASAKI KD 80 M 1986
      KAWASAKI KD 80 M 1985
      KAWASAKI KD 80 M 1984
      KAWASAKI KD 80 M 1983
      KAWASAKI KD 80 M 1982
      KAWASAKI KD 80 M 1981
      KAWASAKI KD 80 M 1980
      KAWASAKI KX 80 1979
      SUZUKI LT 80 2004
      SUZUKI LT 80 2003
      SUZUKI LT 80 2002
      SUZUKI LT 80 2001
      SUZUKI LT 80 2000
      SUZUKI LT 80 1999
      SUZUKI LT 80 1998
      SUZUKI LT 80 1997
      SUZUKI LT 80 1996
      SUZUKI LT 80 1995
      SUZUKI LT 80 1994
      SUZUKI LT 80 1993
      SUZUKI LT 80 1992
      SUZUKI LT 80 1991
      SUZUKI LT 80 1990
      SUZUKI LT 80 1989
      SUZUKI LT 80 1988
      YAMAHA YSR 80 1992
      YAMAHA YSR 80 1991
      YAMAHA YSR 80 1990
      YAMAHA YZ 50 G 1980
      YAMAHA YZ 80 2001
      YAMAHA YZ 80 2000
      YAMAHA YZ 80 1999
      YAMAHA YZ 80 1998
      YAMAHA YZ 80 1997
      YAMAHA YZ 80 1996
      YAMAHA YZ 80 1995
      YAMAHA YZ 80 1994
      YAMAHA YZ 80 1993
      YAMAHA YZ 80 1992
      YAMAHA YZ 80 1991
      YAMAHA YZ 80 1990
      YAMAHA YZ 80 1989
      YAMAHA YZ 80 1988
      YAMAHA YZ 80 1987
      YAMAHA YZ 80 1986
      YAMAHA YZ 80 1985
      YAMAHA YZ 80 1984
      YAMAHA YZ 80 1983
      YAMAHA YZ 80 1982
      YAMAHA YZ 80 1981
      YAMAHA YZ 80 1980
      YAMAHA YZ 80 1979
      YAMAHA YZ 80 1978
      YAMAHA YZ 80 1977
      YAMAHA YZ 80 1976
      YAMAHA YZ 80 1975
      YAMAHA YZ 80 1974
      YAMAHA YZ 80 LW 2001
      YAMAHA YZ 80 LW 2000
      YAMAHA YZ 80 LW 1999
      YAMAHA YZ 80 LW 1998
      YAMAHA YZ 80 LW 1997
      YAMAHA YZ 80 LW 1996
      YAMAHA YZ 80 LW 1995
      YAMAHA YZ 80 LW 1994

      ATHENA
      MS200470140C3K
      15 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA engine bearing 6204 C3 – 20 × 47 × 14 mm for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M
      ATHENA engine bearing for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M, KX 80 from 1974 to 2004
      ATHENA engine bearing 6204 C3 – 20 × 47 × 14 mm for YAMAHA YSR 80, YZ 80, YZ 80 LW, SUZUKI LT 80 and KAWASAKI KD 80 A, KD 80 M
      €7.90
      Tax Included