• New
    WOSSNER engine bearing 6203 C3 – 17 × 40 × 12 mm for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021
    WOSSNER engine bearing 6203 C3 – 17 × 40 × 12 mm for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021

    WOSSNER engine bearing 6203 C3 – 17 × 40 × 12 mm for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021

    Review (0)
    €7.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6203 C3 – 17 × 40 × 12 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Bearing: 6203 C3
      • Dimensions (inner × outer × width): 17 × 40 × 12 mm

      WOSSNER offers this engine bearing for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose WOSSNER?

      Wössner, the German company founded by a former racer, forges its own parts: design and manufacturing are controlled end to end.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Crankshaft
      • Outside diameter: 40 mm
      • Inside diameter: 17 mm
      • Length: 12 mm
      • Precision bearings

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 50 2021
      KTM SX 50 2017
      KTM SX 50 2016
      KTM SX 50 2015
      KTM SX 50 2014
      KTM SX 50 2013
      KTM SX 50 2012
      KTM SX 50 2011
      KTM SX 50 2010
      KTM SX 50 2009
      KTM SX 50 2008
      KTM SX 50 2007
      KTM SX 50 2006
      YAMAHA PW 50 2016
      YAMAHA PW 50 2015
      YAMAHA PW 50 2014
      YAMAHA PW 50 2013
      YAMAHA PW 50 2012
      YAMAHA PW 50 2011
      YAMAHA PW 50 2010
      YAMAHA PW 50 2008
      YAMAHA PW 50 2007
      YAMAHA PW 50 2006
      YAMAHA PW 50 2005
      YAMAHA PW 50 2004
      YAMAHA PW 50 2003
      YAMAHA PW 50 2002
      YAMAHA PW 50 2001
      YAMAHA PW 50 2000
      YAMAHA PW 50 1999
      YAMAHA PW 50 1998
      YAMAHA PW 50 1997
      YAMAHA PW 50 1996
      YAMAHA PW 50 1995
      YAMAHA PW 50 1994
      YAMAHA PW 50 1993
      YAMAHA PW 50 1992
      YAMAHA PW 50 1991
      YAMAHA PW 50 1988
      YAMAHA PW 50 1987
      YAMAHA PW 50 1986
      YAMAHA PW 50 1985
      YAMAHA PW 50 1983
      YAMAHA PW 50 1982

      WOSSNER
      MB6203C3
      10 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      WOSSNER engine bearing 6203 C3 – 17 × 40 × 12 mm for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021
      WOSSNER engine bearing for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021
      WOSSNER engine bearing 6203 C3 – 17 × 40 × 12 mm for YAMAHA PW 50, KTM SX 50 and GAS GAS MC 50 from 1982 to 2021
      €7.90
      Tax Included