• New
    PROX Crankshaft Bearing 30x72x18mm for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018
    PROX Crankshaft Bearing 30x72x18mm for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018

    PROX Crankshaft Bearing 30x72x18mm for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018

    Review (0)
    €63.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      PROX offers this engine bearing for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Manufacturer part number: 23.6306R/3

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KFX 400 2006
      KAWASAKI KFX 400 2005
      KAWASAKI KFX 400 2004
      KAWASAKI KFX 400 2003
      KAWASAKI KLX 400 2004
      KAWASAKI KLX 400 2003
      SUZUKI DR-Z 400 S 2014
      SUZUKI DR-Z 400 S 2013
      SUZUKI DR-Z 400 S 2012
      SUZUKI DR-Z 400 S 2011
      SUZUKI DR-Z 400 S 2010
      SUZUKI DR-Z 400 S 2009
      SUZUKI DR-Z 400 S 2008
      SUZUKI DR-Z 400 S 2007
      SUZUKI DR-Z 400 S 2006
      SUZUKI DR-Z 400 S 2005
      SUZUKI DR-Z 400 S 2004
      SUZUKI DR-Z 400 S 2003
      SUZUKI DR-Z 400 S 2002
      SUZUKI DR-Z 400 S 2001
      SUZUKI DR-Z 400 S 2000
      SUZUKI DR-Z 400 SM 2017
      SUZUKI DR-Z 400 SM 2016
      SUZUKI DR-Z 400 SM 2015
      SUZUKI DR-Z 400 SM 2014
      SUZUKI DR-Z 400 SM 2013
      SUZUKI DR-Z 400 SM 2012
      SUZUKI DR-Z 400 SM 2011
      SUZUKI DR-Z 400 SM 2010
      SUZUKI DR-Z 400 SM 2009
      SUZUKI DR-Z 400 SM 2008
      SUZUKI DR-Z 400 SM 2007
      SUZUKI DR-Z 400 SM 2006
      SUZUKI DR-Z 400 SM 2005
      SUZUKI DRZ 400 2015
      SUZUKI DRZ 400 2014
      SUZUKI DRZ 400 2013
      SUZUKI DRZ 400 2012
      SUZUKI DRZ 400 2011
      SUZUKI DRZ 400 2010
      SUZUKI DRZ 400 2009
      SUZUKI DRZ 400 2008
      SUZUKI DRZ 400 2007
      SUZUKI DRZ 400 2006
      SUZUKI DRZ 400 2005
      SUZUKI DRZ 400 2004
      SUZUKI DRZ 400 2003
      SUZUKI DRZ 400 2002
      SUZUKI DRZ 400 2001
      SUZUKI DRZ 400 2000
      SUZUKI LTZ 400 2018
      SUZUKI LTZ 400 2017
      SUZUKI LTZ 400 2016
      SUZUKI LTZ 400 2015
      SUZUKI LTZ 400 2014
      SUZUKI LTZ 400 2013
      SUZUKI LTZ 400 2012
      SUZUKI LTZ 400 2011
      SUZUKI LTZ 400 2010
      SUZUKI LTZ 400 2009
      SUZUKI LTZ 400 2008
      SUZUKI LTZ 400 2007
      SUZUKI LTZ 400 2006
      SUZUKI LTZ 400 2005
      SUZUKI LTZ 400 2004
      SUZUKI LTZ 400 2003

      PROX
      23.6306R/3
      1 Item

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Crankshaft Bearing 30x72x18mm for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018
      PROX Crankshaft Bearing 30x72x18mm for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018
      PROX Crankshaft Bearing 30x72x18mm for SUZUKI DR-Z 400 S, DR-Z 400 SM, DRZ 400, LTZ 400 and KAWASAKI KFX 400, KLX 400 2000-2018
      €63.90
      Tax Included