• New
    WOSSNER engine bearing 6205 C3 – 25 × 52 × 15 mm for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006
    WOSSNER engine bearing 6205 C3 – 25 × 52 × 15 mm for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006

    WOSSNER engine bearing 6205 C3 – 25 × 52 × 15 mm for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006

    Review (0)
    €13.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6205 C3 – 25 × 52 × 15 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

    Wishlist
    Write your review

      Check before ordering

      • Bearing: 6205 C3
      • Dimensions (inner × outer × width): 25 × 52 × 15 mm

      WOSSNER offers this engine bearing for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose WOSSNER?

      Wössner, the German company founded by a former racer, forges its own parts: design and manufacturing are controlled end to end.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Crankshaft
      • Outside diameter: 52 mm
      • Inside diameter: 25 mm
      • Precision bearings

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      SUZUKI RM 125 1988
      SUZUKI RM 125 1987
      SUZUKI RM 125 1986
      SUZUKI RM 125 1985
      SUZUKI RM 125 1984
      SUZUKI RM 125 1983
      SUZUKI RM 125 1982
      SUZUKI RM 125 1981
      YAMAHA BW 80 1990
      YAMAHA BW 80 1988
      YAMAHA BW 80 1987
      YAMAHA BW 80 1986
      YAMAHA PW 80 2006
      YAMAHA YZ 125 1985
      YAMAHA YZ 125 1984
      YAMAHA YZ 125 1983

      WOSSNER
      MB6205C3
      5 Items

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      WOSSNER engine bearing 6205 C3 – 25 × 52 × 15 mm for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006
      WOSSNER engine bearing 6205 C3 – 25 × 52 × 15 mm for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006
      WOSSNER engine bearing for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006
      WOSSNER engine bearing 6205 C3 – 25 × 52 × 15 mm for SUZUKI RM 125 and YAMAHA BW 80, PW 80, YZ 125 from 1981 to 2006
      €13.90
      Tax Included