- New

PROX offers this crankshaft bearing and seal kit for KTM SMR 450, SX 450 ATV, SX 505 ATV, SX-F 450, SX-F 505, XC-F 505 from 2007 to 2012. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.
Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.
ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).
Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.
The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.
Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.
Check the exact model and year of your bike in the list below before ordering.
Fits:
KTM SMR 450 2012
KTM SMR 450 2011
KTM SMR 450 2010
KTM SMR 450 2009
KTM SMR 450 2008
KTM SX 450 ATV 2010
KTM SX 450 ATV 2009
KTM SX 505 ATV 2010
KTM SX 505 ATV 2009
KTM SX-F 450 2012
KTM SX-F 450 2011
KTM SX-F 450 2010
KTM SX-F 450 2009
KTM SX-F 450 2008
KTM SX-F 450 2007
KTM SX-F 505 2008
KTM XC-F 505 2009
Click on your bike to see all compatible parts.
No customer reviews for the moment.