• New
    PROX Crankshaft Bearing Ø20x52x15 - 6304JR2 for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025
    PROX Crankshaft Bearing Ø20x52x15 - 6304JR2 for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025

    PROX Crankshaft Bearing Ø20x52x15 - 6304JR2 for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025

    Review (0)
    €15.90
    Tax Included
    Más de 5 unidades actualmente en stock en nuestro proveedor, enviado en 2 a 5 días.

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Más de 5 unidades actualmente en stock en nuestro proveedor, enviado en 2 a 5 días.

      PROX offers this engine bearing for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Packing: by unit
      • Manufacturer part number: 23.6304JR2

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 65 2025
      GAS GAS MC 65 2024
      GAS GAS MC 65 2023
      GAS GAS MC 65 2022
      GAS GAS MC 65 2021
      HUSQVARNA TC 65 2024
      HUSQVARNA TC 65 2023
      HUSQVARNA TC 65 2022
      HUSQVARNA TC 65 2021
      HUSQVARNA TC 65 2020
      HUSQVARNA TC 65 2019
      HUSQVARNA TC 65 2018
      HUSQVARNA TC 65 2017
      KTM SX 65 2025
      KTM SX 65 2024
      KTM SX 65 2023
      KTM SX 65 2022
      KTM SX 65 2021
      KTM SX 65 2020
      KTM SX 65 2019
      KTM SX 65 2018
      KTM SX 65 2017
      KTM SX 65 2016
      KTM SX 65 2015
      KTM SX 65 2014
      KTM SX 65 2013
      KTM SX 65 2012
      KTM SX 65 2011
      KTM SX 65 2010
      KTM SX 65 2009

      PROX
      23.6304JR2
      11 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Crankshaft Bearing Ø20x52x15 - 6304JR2 for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025
      PROX Crankshaft Bearing Ø20x52x15 - 6304JR2 for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025
      PROX Crankshaft Bearing Ø20x52x15 - 6304JR2 for KTM SX 65, HUSQVARNA TC 65 and GAS GAS MC 65 2009-2025
      €15.90
      Tax Included