PROX engine bearing 32 × 65 × 17 mm for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027

Name: PROX engine bearing 32 × 65 × 17 mm for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027
Brand: PROX
SKU: 23.6232X2
Price: 33.9 EUR
Availability: InStock

Review (0)

€33.90

Tax Included

Stock del proveedor, enviado en 2 a 5 días.

Bearing: 32 × 65 × 17 mm

An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

Check before ordering

Dimensions (inner × outer × width): 32 × 65 × 17 mm

PROX offers this engine bearing for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

What is this bearing made of?

Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

Why choose PROX?

ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

When should you replace the bearings?

On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

Specifications and fitting tips

Application: Crankshaft
ProX bearings are made in major bearing manufacturers' factories, mainly in Japan
All bearings are made to OEM specifications for optimum quality and performance

Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

Also needed with this part

Complete engine gasket kit : PROX · MOOSE
2-stroke oil : LIQUI MOLY 1 L 3065 · LIQUI MOLY 1 L 3063

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Reference 23.6232X2

In stock1 Item

Specific References

Click on your bike to see all compatible parts.

Write your review

No customer reviews for the moment.

PROX engine bearing for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027

PROX engine bearing 32 × 65 × 17 mm for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027

€33.90

Tax Included


PHP_SESSID	cross-mania.com	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	.cross-mania.com	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours

Shopping Cart

PROX engine bearing 32 × 65 × 17 mm for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027

Check before ordering

What is this bearing made of?

Why choose PROX?

When should you replace the bearings?

Specifications and fitting tips

Also needed with this part

Compatibility

PROX engine bearing 32 × 65 × 17 mm for KTM SX 250, HUSQVARNA TC 250, GAS GAS EC 300 and HUSABERG TE 250 from 2003 to 2027