• New

    PROX crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2013 to 2023

    Review (0)
    €29.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      PROX offers this crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2013 to 2023. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      Recommended hours for a bottom-end rebuild (manufacturer recommendation for the KTM SX 50/65, Husqvarna TC 50/65 2017-2023):

      • Racing: every 80 h.
      • Leisure: no KTM figure; have the wear checked at every top-end rebuild.

      Specifications and fitting tips

      • Application: Crankshaft
      • Built to exact OEM specifications for maximum performance and durability
      • Include all bearings/seals required to replace the component

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 50 2023
      GAS GAS MC 50 2022
      GAS GAS MC 50 2021
      HUSQVARNA TC 50 2023
      HUSQVARNA TC 50 2022
      HUSQVARNA TC 50 2021
      HUSQVARNA TC 50 2020
      HUSQVARNA TC 50 2019
      HUSQVARNA TC 50 2018
      HUSQVARNA TC 50 2017
      KTM SX 50 2023
      KTM SX 50 2022
      KTM SX 50 2021
      KTM SX 50 2020
      KTM SX 50 2019
      KTM SX 50 2018
      KTM SX 50 2017
      KTM SX 50 2016
      KTM SX 50 2015
      KTM SX 50 2014
      KTM SX 50 2013
      KTM SX 50 MINI 2023
      KTM SX 50 MINI 2022
      KTM SX 50 MINI 2021
      KTM SX 50 MINI 2020
      KTM SX 50 MINI 2019
      KTM SX 50 MINI 2018
      KTM SX 50 MINI 2017
      KTM SX 50 MINI 2016
      KTM SX 50 MINI 2015
      KTM SX 50 MINI 2014
      KTM SX 50 MINI 2013

      PROX
      23.CBS60013
      13 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2013 to 2023