• New
    MOOSE RACING crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023
    MOOSE RACING crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023

    MOOSE RACING crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023

    Review (0)
    €38.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      MOOSE RACING offers this crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose MOOSE RACING?

      Moose Racing, the American brand founded by riders in 1986 and distributed by the LeMans group (Parts Unlimited, Parts Europe), covers all off-road bike maintenance.

      When should you replace the bearings?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      Recommended hours for a bottom-end rebuild (manufacturer recommendation for the KTM SX 50/65, Husqvarna TC 50/65 2017-2023):

      • Racing: every 80 h.
      • Leisure: no KTM figure; have the wear checked at every top-end rebuild.

      Specifications and fitting tips

      • Application: Crankshaft
      • Precision crankshaft bearings
      • Kit contains right and left crankshaft bearings; 2-stroke kits include the outer seals

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 50 2023
      GAS GAS MC 50 2022
      GAS GAS MC 50 2021
      HUSQVARNA TC 50 2023
      HUSQVARNA TC 50 2022
      HUSQVARNA TC 50 2021
      HUSQVARNA TC 50 2020
      HUSQVARNA TC 50 2019
      HUSQVARNA TC 50 2018
      KTM SX 50 2023
      KTM SX 50 2022
      KTM SX 50 2021
      KTM SX 50 2020
      KTM SX 50 2019
      KTM SX 50 2018
      KTM SX 50 2017
      KTM SX 50 2016
      KTM SX 50 2015
      KTM SX 50 2014
      KTM SX 50 2013
      KTM SX 50 2012
      KTM SX 50 2011
      KTM SX 50 2010
      KTM SX 50 MINI 2023
      KTM SX 50 MINI 2022
      KTM SX 50 MINI 2021
      KTM SX 50 MINI 2020
      KTM SX 50 MINI 2019
      KTM SX 50 MINI 2018
      KTM SX 50 MINI 2017
      KTM SX 50 MINI 2016
      KTM SX 50 MINI 2015
      KTM SX 50 MINI 2014
      KTM SX 50 MINI 2013
      KTM SX 50 MINI 2012
      KTM SX 50 MINI 2011
      KTM SX 50 MINI 2010
      KTM SX 50 MINI 2009

      MOOSE
      24-1099
      10 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      MOOSE RACING crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023
      MOOSE RACING crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023
      MOOSE RACING crankshaft bearing and seal kit for KTM SX 50, SX 50 MINI, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2023
      €38.90
      Tax Included