• New
    NTN Crankshaft Bearing 30x62x16mm for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020
    NTN Crankshaft Bearing 30x62x16mm for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020

    NTN Crankshaft Bearing 30x62x16mm for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020

    Review (0)
    €23.90
    Tax Included
    Más de 5 unidades actualmente en stock en nuestro proveedor, enviado en 2 a 5 días.

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Más de 5 unidades actualmente en stock en nuestro proveedor, enviado en 2 a 5 días.

      NTN offers this engine bearing for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose NTN?

      NTN, the Japanese bearing maker founded in 1918, is the brand chosen by engine specialists such as ProX for their crankshaft bearing kits.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Manufacturer part number: 6206JR2C4

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KX 250 2020
      KAWASAKI KX 250 2019
      KAWASAKI KXF 250 2018
      KAWASAKI KXF 250 2017
      KAWASAKI KXF 250 2016
      KAWASAKI KXF 250 2015
      KAWASAKI KXF 250 2014
      KAWASAKI KXF 250 2013
      KAWASAKI KXF 250 2012
      KAWASAKI KXF 250 2011
      KAWASAKI KXF 250 2010
      KAWASAKI KXF 250 2009
      KAWASAKI KXF 250 2008
      KAWASAKI KXF 250 2007
      KAWASAKI KXF 250 2006
      KAWASAKI KXF 250 2005
      KAWASAKI KXF 250 2004
      KTM EXC 250 1996
      KTM EXC 250 1995
      KTM EXC 250 1994
      KTM GS 250 1992
      KTM GS 250 1991
      KTM GS 250 1990
      KTM GS 250 1989
      KTM GS 250 1988
      KTM GS 250 1987
      KTM GS 250 1986
      KTM GS 250 1985
      KTM GS 250 1984
      KTM SX 250 1996
      KTM SX 250 1995
      KTM SX 250 1994
      SUZUKI RMZ 250 2006
      SUZUKI RMZ 250 2005
      SUZUKI RMZ 250 2004

      NTN
      6206JR2C4
      22 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      NTN Crankshaft Bearing 30x62x16mm for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020
      NTN Crankshaft Bearing 30x62x16mm for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020
      NTN Crankshaft Bearing 30x62x16mm for KAWASAKI KX 250, KXF 250, KTM EXC 250, GS 250, SX 250 and SUZUKI RMZ 250 1984-2020
      €23.90
      Tax Included