• New
    HOT RODS engine bearing for KAWASAKI KX 450 F from 2008 to 2020
    HOT RODS engine bearing for KAWASAKI KX 450 F from 2008 to 2020

    HOT RODS engine bearing for KAWASAKI KX 450 F from 2008 to 2020

    Review (0)
    €75.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    Kit contents: 2 bearings

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      Check before ordering

      • Kit contents: 2 bearings
      • Bearing: 32 × 72 × 19 mm – ×2

      HOT RODS offers this engine bearing for KAWASAKI KX 450 F from 2008 to 2020. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose HOT RODS?

      Hot Rods, the bottom-end specialist since 1993: crankshafts, rods, bearings and seals for a complete rebuild.

      When should you replace the bearings on your KAWASAKI KX 450 F?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Crankshaft
      • High-precision, high-quality main bearing and seal kits designed for Hot Rods crankshafts
      • All kits contain two main bearings and two seals unless otherwise noted

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KX 450 F 2020
      KAWASAKI KX 450 F 2019
      KAWASAKI KX 450 F 2018
      KAWASAKI KX 450 F 2017
      KAWASAKI KX 450 F 2016
      KAWASAKI KX 450 F 2015
      KAWASAKI KX 450 F 2014
      KAWASAKI KX 450 F 2013
      KAWASAKI KX 450 F 2012
      KAWASAKI KX 450 F 2011
      KAWASAKI KX 450 F 2010
      KAWASAKI KX 450 F 2009
      KAWASAKI KX 450 F 2008

      HOT RODS
      K091
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      HOT RODS engine bearing for KAWASAKI KX 450 F from 2008 to 2020
      HOT RODS engine bearing for KAWASAKI KX 450 F from 2008 to 2020
      HOT RODS engine bearing for KAWASAKI KX 450 F from 2008 to 2020
      €75.90
      Tax Included