• New
    PROX engine bearing 6306 C3 – 30 × 72 × 19 mm for YAMAHA XT 225, KAWASAKI KX 500 E
    PROX engine bearing 6306 C3 – 30 × 72 × 19 mm for YAMAHA XT 225, KAWASAKI KX 500 E

    PROX engine bearing 6306 C3 – 30 × 72 × 19 mm for YAMAHA XT 225, KAWASAKI KX 500 E

    Review (0)
    €26.51
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6306 C3 – 30 × 72 × 19 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Bearing: 6306 C3
      • Dimensions (inner × outer × width): 30 × 72 × 19 mm

      PROX offers this engine bearing for YAMAHA XT 225, KAWASAKI KX 500 E, SUZUKI DR 350 and HONDA XL 250 S from 1979 to 2007. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Crankshaft
      • ProX bearings are made in major bearing manufacturers' factories, mainly in Japan
      • All bearings are made to OEM specifications for optimum quality and performance

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA XL 250 S 1983
      HONDA XL 250 S 1982
      HONDA XL 250 S 1981
      HONDA XL 250 S 1980
      HONDA XL 250 S 1979
      KAWASAKI KX 500 A 1984
      KAWASAKI KX 500 A 1983
      KAWASAKI KX 500 B 1986
      KAWASAKI KX 500 B 1985
      KAWASAKI KX 500 C 1987
      KAWASAKI KX 500 D 1988
      KAWASAKI KX 500 E 2004
      KAWASAKI KX 500 E 2003
      KAWASAKI KX 500 E 2002
      KAWASAKI KX 500 E 2001
      KAWASAKI KX 500 E 2000
      KAWASAKI KX 500 E 1999
      KAWASAKI KX 500 E 1998
      KAWASAKI KX 500 E 1997
      KAWASAKI KX 500 E 1996
      KAWASAKI KX 500 E 1995
      KAWASAKI KX 500 E 1994
      KAWASAKI KX 500 E 1993
      KAWASAKI KX 500 E 1992
      KAWASAKI KX 500 E 1991
      KAWASAKI KX 500 E 1990
      KAWASAKI KX 500 E 1989
      SUZUKI DR 350 1998
      SUZUKI DR 350 1997
      SUZUKI DR 350 1996
      SUZUKI DR 350 1995
      SUZUKI DR 350 1994
      SUZUKI DR 350 1993
      SUZUKI DR 350 1992
      SUZUKI DR 350 1991
      SUZUKI DR 350 1990
      SUZUKI DR 350 SE 1999
      SUZUKI DR 350 SE 1998
      SUZUKI DR 350 SE 1997
      SUZUKI DR 350 SE 1996
      SUZUKI DR 350 SE 1995
      SUZUKI DR 350 SE 1994
      YAMAHA XT 225 2007
      YAMAHA XT 225 2006
      YAMAHA XT 225 2005
      YAMAHA XT 225 2004
      YAMAHA XT 225 2003
      YAMAHA XT 225 2002
      YAMAHA XT 225 2001
      YAMAHA XT 225 2000
      YAMAHA XT 225 1999
      YAMAHA XT 225 1998
      YAMAHA XT 225 1997
      YAMAHA XT 225 1996
      YAMAHA XT 225 1995
      YAMAHA XT 225 1994
      YAMAHA XT 225 1993
      YAMAHA XT 225 1992
      YAMAHA YZ 465 1981
      YAMAHA YZ 465 1980
      YAMAHA YZ 490 1990
      YAMAHA YZ 490 1989
      YAMAHA YZ 490 1988
      YAMAHA YZ 490 1987
      YAMAHA YZ 490 1986
      YAMAHA YZ 490 1985
      YAMAHA YZ 490 1984
      YAMAHA YZ 490 1983
      YAMAHA YZ 490 1982

      PROX
      23.6306C3
      13 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX engine bearing 6306 C3 – 30 × 72 × 19 mm for YAMAHA XT 225, KAWASAKI KX 500 E
      PROX engine bearing for YAMAHA XT 225, KAWASAKI KX 500 E, SUZUKI DR 350 and HONDA XL 250 S from 1979 to 2007
      PROX engine bearing 6306 C3 – 30 × 72 × 19 mm for YAMAHA XT 225, KAWASAKI KX 500 E
      €26.51
      Tax Included