• New
    ATHENA Engine Bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994
    ATHENA Engine Bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994

    ATHENA Engine Bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994

    Review (0)
    €19.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      ATHENA offers this engine bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the bearings on your HUSQVARNA CR 125?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Type: 6304TN9/C4
      • Manufacturer part number: MS200520150N4

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      CAGIVA WMX 125 1989
      CAGIVA WMX 125 1988
      HUSQVARNA CR 125 1994
      HUSQVARNA CR 125 1993
      HUSQVARNA CR 125 1992
      HUSQVARNA CR 125 1991
      HUSQVARNA CR 125 1990
      HUSQVARNA CR 125 1989
      HUSQVARNA WR 125 1994
      HUSQVARNA WR 125 1993
      HUSQVARNA WR 125 1992
      HUSQVARNA WR 125 1991
      HUSQVARNA WR 125 1990
      HUSQVARNA WR 125 1989
      HUSQVARNA WRK 125 1989
      HUSQVARNA WRK 125 1988
      HUSQVARNA WRK 125 1987
      HUSQVARNA WXE 125 1991
      HUSQVARNA WXE 125 1990

      ATHENA
      MS200520150N4
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Engine Bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994
      ATHENA Engine Bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994
      ATHENA Engine Bearing for HUSQVARNA CR 125, WR 125, WRK 125, WXE 125 and CAGIVA WMX 125 1987-1994
      €19.90
      Tax Included