• New
    WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250
    WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250

    WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250

    Review (0)
    €17.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 6305 C3 – 25 × 62 × 17 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Bearing: 6305 C3
      • Dimensions (inner × outer × width): 25 × 62 × 17 mm

      WOSSNER offers this engine bearing for HUSQVARNA WR 250, KAWASAKI KX 250, SUZUKI RM 250 and GAS GAS EX 250 from 1978 to 2023. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose WOSSNER?

      Wössner, the German company founded by a former racer, forges its own parts: design and manufacturing are controlled end to end.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Crankshaft
      • Outside diameter: 62 mm
      • Inside diameter: 25 mm
      • Length: 17 mm
      • Precision bearings

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EC 250 2021
      GAS GAS EX 250 2023
      GAS GAS EX 250 2022
      GAS GAS EX 250 2021
      HUSQVARNA CR 250 2005
      HUSQVARNA CR 250 2004
      HUSQVARNA CR 250 2003
      HUSQVARNA CR 250 2002
      HUSQVARNA CR 250 2001
      HUSQVARNA CR 250 2000
      HUSQVARNA CR 250 1999
      HUSQVARNA CR 250 1998
      HUSQVARNA TC 250 2017
      HUSQVARNA TC 250 2016
      HUSQVARNA TC 250 2015
      HUSQVARNA TC 250 2014
      HUSQVARNA TE 300 2018
      HUSQVARNA TE 300 2017
      HUSQVARNA TE 300 2016
      HUSQVARNA TE 300 2015
      HUSQVARNA TE 300 2014
      HUSQVARNA WR 250 2012
      HUSQVARNA WR 250 2011
      HUSQVARNA WR 250 2010
      HUSQVARNA WR 250 2009
      HUSQVARNA WR 250 2008
      HUSQVARNA WR 250 2007
      HUSQVARNA WR 250 2006
      HUSQVARNA WR 250 2005
      HUSQVARNA WR 250 2004
      HUSQVARNA WR 250 2003
      HUSQVARNA WR 250 2002
      HUSQVARNA WR 250 2001
      HUSQVARNA WR 250 2000
      HUSQVARNA WR 250 1999
      HUSQVARNA WR 250 1998
      HUSQVARNA WR 300 2013
      HUSQVARNA WR 300 2012
      HUSQVARNA WR 300 2011
      HUSQVARNA WR 300 2010
      HUSQVARNA WR 300 2009
      KAWASAKI KDX 250 1982
      KAWASAKI KDX 250 1981
      KAWASAKI KDX 250 1980
      KAWASAKI KX 125 B 1983
      KAWASAKI KX 125 B 1982
      KAWASAKI KX 125 C 1984
      KAWASAKI KX 125 D 1985
      KAWASAKI KX 125 E 1987
      KAWASAKI KX 125 E 1986
      KAWASAKI KX 250 1986
      KAWASAKI KX 250 1985
      KAWASAKI KX 250 1984
      KAWASAKI KX 250 1983
      KAWASAKI KX 250 1982
      KAWASAKI KX 250 1981
      KAWASAKI KX 250 1980
      KAWASAKI KX 250 1979
      KAWASAKI KX 250 1978
      SUZUKI RM 250 1993
      SUZUKI RM 250 1992
      SUZUKI RM 250 1991
      SUZUKI RM 250 1990
      SUZUKI RM 250 1989
      SUZUKI RM 250 1988
      SUZUKI RM 250 1987
      SUZUKI RM 250 1986
      SUZUKI RM 250 1985
      SUZUKI RM 250 1984
      SUZUKI RM 250 1983
      SUZUKI RM 250 1982
      SUZUKI RMX 250 1993
      SUZUKI RMX 250 1992
      SUZUKI RMX 250 1991
      SUZUKI RMX 250 1990
      SUZUKI RMX 250 1989

      WOSSNER
      MB6305C3
      12 Items

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250
      WOSSNER engine bearing for HUSQVARNA WR 250, KAWASAKI KX 250, SUZUKI RM 250 and GAS GAS EX 250 from 1978 to 2023
      WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250
      €17.90
      Tax Included