WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250
      WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250

      WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250

      Review (0)
      €17.90
      Tax Included
      Stock del proveedor, enviado en 2 a 5 días.

      Bearing: 6305 C3 – 25 × 62 × 17 mm

      An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

      Quantity :
      In stock

      Stock del proveedor, enviado en 2 a 5 días.

        Check before ordering

        • Bearing: 6305 C3
        • Dimensions (inner × outer × width): 25 × 62 × 17 mm

        WOSSNER offers this engine bearing for HUSQVARNA WR 250, KAWASAKI KX 250, SUZUKI RM 250 and GAS GAS EX 250 from 1978 to 2023. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

        What is this bearing made of?

        Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

        • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
        • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
        • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

        Why choose WOSSNER?

        Wössner, the German company founded by a former racer, forges its own parts: design and manufacturing are controlled end to end.

        When should you replace the bearings?

        On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

        Specifications and fitting tips

        • Application: Crankshaft
        • Outside diameter: 62 mm
        • Inside diameter: 25 mm
        • Length: 17 mm
        • Precision bearings

        Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

        Also needed with this part

        Compatibility

        Check the exact model and year of your bike in the list below before ordering.

        Fits:
        GAS GAS EC 250 2021
        GAS GAS EX 250 2023
        GAS GAS EX 250 2022
        GAS GAS EX 250 2021
        HUSQVARNA CR 250 2005
        HUSQVARNA CR 250 2004
        HUSQVARNA CR 250 2003
        HUSQVARNA CR 250 2002
        HUSQVARNA CR 250 2001
        HUSQVARNA CR 250 2000
        HUSQVARNA CR 250 1999
        HUSQVARNA CR 250 1998
        HUSQVARNA TC 250 2017
        HUSQVARNA TC 250 2016
        HUSQVARNA TC 250 2015
        HUSQVARNA TC 250 2014
        HUSQVARNA TE 300 2018
        HUSQVARNA TE 300 2017
        HUSQVARNA TE 300 2016
        HUSQVARNA TE 300 2015
        HUSQVARNA TE 300 2014
        HUSQVARNA WR 250 2012
        HUSQVARNA WR 250 2011
        HUSQVARNA WR 250 2010
        HUSQVARNA WR 250 2009
        HUSQVARNA WR 250 2008
        HUSQVARNA WR 250 2007
        HUSQVARNA WR 250 2006
        HUSQVARNA WR 250 2005
        HUSQVARNA WR 250 2004
        HUSQVARNA WR 250 2003
        HUSQVARNA WR 250 2002
        HUSQVARNA WR 250 2001
        HUSQVARNA WR 250 2000
        HUSQVARNA WR 250 1999
        HUSQVARNA WR 250 1998
        HUSQVARNA WR 300 2013
        HUSQVARNA WR 300 2012
        HUSQVARNA WR 300 2011
        HUSQVARNA WR 300 2010
        HUSQVARNA WR 300 2009
        KAWASAKI KDX 250 1982
        KAWASAKI KDX 250 1981
        KAWASAKI KDX 250 1980
        KAWASAKI KX 125 B 1983
        KAWASAKI KX 125 B 1982
        KAWASAKI KX 125 C 1984
        KAWASAKI KX 125 D 1985
        KAWASAKI KX 125 E 1987
        KAWASAKI KX 125 E 1986
        KAWASAKI KX 250 1986
        KAWASAKI KX 250 1985
        KAWASAKI KX 250 1984
        KAWASAKI KX 250 1983
        KAWASAKI KX 250 1982
        KAWASAKI KX 250 1981
        KAWASAKI KX 250 1980
        KAWASAKI KX 250 1979
        KAWASAKI KX 250 1978
        SUZUKI RM 250 1993
        SUZUKI RM 250 1992
        SUZUKI RM 250 1991
        SUZUKI RM 250 1990
        SUZUKI RM 250 1989
        SUZUKI RM 250 1988
        SUZUKI RM 250 1987
        SUZUKI RM 250 1986
        SUZUKI RM 250 1985
        SUZUKI RM 250 1984
        SUZUKI RM 250 1983
        SUZUKI RM 250 1982
        SUZUKI RMX 250 1993
        SUZUKI RMX 250 1992
        SUZUKI RMX 250 1991
        SUZUKI RMX 250 1990
        SUZUKI RMX 250 1989

        WOSSNER
        MB6305C3
        12 Items

        Specific References

        Click on your bike to see all compatible parts.

        No customer reviews for the moment.

        Write your review
        WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250
        WOSSNER engine bearing for HUSQVARNA WR 250, KAWASAKI KX 250, SUZUKI RM 250 and GAS GAS EX 250 from 1978 to 2023
        WOSSNER engine bearing 6305 C3 – 25 × 62 × 17 mm for HUSQVARNA WR 250, KAWASAKI KX 250
        €17.90
        Tax Included