• New

    PROX crankshaft bearing and seal kit for HUSQVARNA CR 125, WR 125 from 1998 to 2013

    Review (0)
    €85.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      PROX offers this crankshaft bearing and seal kit for HUSQVARNA CR 125, WR 125 from 1998 to 2013. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings on your HUSQVARNA CR 125?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Application: Crankshaft
      • Built to exact OEM specifications for maximum performance and durability
      • Include all bearings/seals required to replace the component

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 125 2013
      HUSQVARNA CR 125 2012
      HUSQVARNA CR 125 2011
      HUSQVARNA CR 125 2010
      HUSQVARNA CR 125 2009
      HUSQVARNA CR 125 2008
      HUSQVARNA CR 125 2007
      HUSQVARNA CR 125 2006
      HUSQVARNA CR 125 2005
      HUSQVARNA CR 125 2004
      HUSQVARNA CR 125 2003
      HUSQVARNA CR 125 2002
      HUSQVARNA CR 125 2001
      HUSQVARNA CR 125 2000
      HUSQVARNA CR 125 1999
      HUSQVARNA CR 125 1998
      HUSQVARNA WR 125 2013
      HUSQVARNA WR 125 2012
      HUSQVARNA WR 125 2011
      HUSQVARNA WR 125 2010
      HUSQVARNA WR 125 2009
      HUSQVARNA WR 125 2008
      HUSQVARNA WR 125 2007
      HUSQVARNA WR 125 2006
      HUSQVARNA WR 125 2005
      HUSQVARNA WR 125 2004
      HUSQVARNA WR 125 2003
      HUSQVARNA WR 125 2002
      HUSQVARNA WR 125 2001
      HUSQVARNA WR 125 2000
      HUSQVARNA WR 125 1999
      HUSQVARNA WR 125 1998

      PROX
      23.CBS62020
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX crankshaft bearing and seal kit for HUSQVARNA CR 125, WR 125 from 1998 to 2013