• New
    MOOSE RACING crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013
    MOOSE RACING crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013

    MOOSE RACING crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013

    Review (0)
    €75.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      MOOSE RACING offers this crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose MOOSE RACING?

      Moose Racing, the American brand founded by riders in 1986 and distributed by the LeMans group (Parts Unlimited, Parts Europe), covers all off-road bike maintenance.

      When should you replace the bearings on your HUSQVARNA WR 250?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Application: Crankshaft
      • Precision crankshaft bearings
      • Kit contains right and left crankshaft bearings; 2-stroke kits include the outer seals

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 125 1999
      HUSQVARNA CR 125 1998
      HUSQVARNA CR 250 2004
      HUSQVARNA CR 250 2003
      HUSQVARNA CR 250 2002
      HUSQVARNA CR 250 2001
      HUSQVARNA CR 250 2000
      HUSQVARNA CR 250 1999
      HUSQVARNA SM 125 S 1998
      HUSQVARNA WR 125 1999
      HUSQVARNA WR 125 1998
      HUSQVARNA WR 250 2013
      HUSQVARNA WR 250 2012
      HUSQVARNA WR 250 2011
      HUSQVARNA WR 250 2010
      HUSQVARNA WR 250 2009
      HUSQVARNA WR 250 2008
      HUSQVARNA WR 250 2007
      HUSQVARNA WR 250 2006
      HUSQVARNA WR 250 2004
      HUSQVARNA WR 250 2003
      HUSQVARNA WR 250 2002
      HUSQVARNA WR 250 2001
      HUSQVARNA WR 250 2000
      HUSQVARNA WR 250 1999
      HUSQVARNA WR 300 2013
      HUSQVARNA WR 300 2012
      HUSQVARNA WR 300 2011
      HUSQVARNA WR 300 2010
      HUSQVARNA WR 300 2009

      MOOSE
      24-1107
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      MOOSE RACING crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013
      MOOSE RACING crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013
      MOOSE RACING crankshaft bearing and seal kit for HUSQVARNA CR 125, CR 250, SM 125 S, WR 125, WR 250, WR 300 from 1998 to 2013
      €75.90
      Tax Included