• New
    HOT RODS crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018
    HOT RODS crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018

    HOT RODS crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018

    Review (0)
    €110.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      HOT RODS offers this crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose HOT RODS?

      Hot Rods, the bottom-end specialist since 1993: crankshafts, rods, bearings and seals for a complete rebuild.

      When should you replace the bearings on your HONDA CRF 450 X?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Application: Crankshaft
      • High-precision, high-quality main bearing and seal kit for installing Hot Rods crankshafts
      • Kit contains two main bearings and two seals unless otherwise stated

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA CRF 450 X 2018
      HONDA CRF 450 X 2017
      HONDA CRF 450 X 2016
      HONDA CRF 450 X 2015
      HONDA CRF 450 X 2014
      HONDA CRF 450 X 2013
      HONDA CRF 450 X 2012
      HONDA CRF 450 X 2011
      HONDA CRF 450 X 2010
      HONDA CRF 450 X 2009
      HONDA CRF 450 X 2008
      HONDA CRF 450 X 2007
      HONDA CRF 450 X 2006
      HONDA CRF 450 X 2005

      HOT RODS
      K063
      4 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      HOT RODS crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018
      HOT RODS crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018
      HOT RODS crankshaft bearing and seal kit for HONDA CRF 450 X from 2005 to 2018
      €110.90
      Tax Included