• New
    ATHENA engine bearing 22 × 56 × 16 mm for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R
    ATHENA engine bearing 22 × 56 × 16 mm for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R

    ATHENA engine bearing 22 × 56 × 16 mm for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R

    Review (0)
    €19.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    Bearing: 22 × 56 × 16 mm

    An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      Check before ordering

      • Dimensions (inner × outer × width): 22 × 56 × 16 mm

      ATHENA offers this engine bearing for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R, CRF 100 F and YAMAHA YZ 125 from 1980 to 2016. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ATHENA?

      Athena, the Italian manufacturer founded in 1973, is an original-equipment supplier to manufacturers such as KTM and Ducati: the same standards for your replacement parts.

      When should you replace the bearings?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Application: Engine
      • Outside diameter: 56 mm
      • Inside diameter: 22 mm
      • Thickness: 16 mm
      • Material: Stainless steel
      • Electric Motor Quality (EMQ): tight tolerances for a quiet, vibration-free bearing

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA CR 125 R 2006
      HONDA CR 125 R 2005
      HONDA CR 125 R 2004
      HONDA CR 125 R 2003
      HONDA CR 125 R 2002
      HONDA CR 125 R 2001
      HONDA CR 125 R 2000
      HONDA CR 125 R 1999
      HONDA CR 125 R 1998
      HONDA CR 125 R 1997
      HONDA CR 125 R 1996
      HONDA CR 125 R 1995
      HONDA CR 125 R 1994
      HONDA CR 125 R 1993
      HONDA CR 125 R 1992
      HONDA CR 125 R 1991
      HONDA CR 125 R 1990
      HONDA CR 125 R 1989
      HONDA CR 125 R 1988
      HONDA CR 125 R 1987
      HONDA CR 125 R 1986
      HONDA CR 125 R 1985
      HONDA CR 125 R 1984
      HONDA CR 125 R 1983
      HONDA CR 125 R 1982
      HONDA CR 125 R 1981
      HONDA CR 125 R 1980
      HONDA CR 80 R 1995
      HONDA CR 80 R 1994
      HONDA CR 80 R 1993
      HONDA CR 80 R 1992
      HONDA CR 80 R 1991
      HONDA CR 80 R 1990
      HONDA CR 80 R 1989
      HONDA CR 80 R 1988
      HONDA CR 80 R 1987
      HONDA CR 80 R 1986
      HONDA CR 80 R 1985
      HONDA CR 80 R 1984
      HONDA CR 80 R 1983
      HONDA CR 80 R 1982
      HONDA CR 80 R 1981
      HONDA CR 80 R 1980
      HONDA CR 80 RB 2002
      HONDA CR 80 RB 2001
      HONDA CR 80 RB 2000
      HONDA CR 80 RB 1999
      HONDA CR 80 RB 1998
      HONDA CR 80 RB 1997
      HONDA CR 80 RB 1996
      HONDA CR 85 R 2006
      HONDA CR 85 R 2005
      HONDA CR 85 R 2004
      HONDA CR 85 R 2003
      HONDA CRF 100 F 2009
      HONDA CRF 100 F 2008
      HONDA CRF 100 F 2007
      HONDA CRF 100 F 2006
      HONDA CRF 100 F 2005
      HONDA CRF 100 F 2004
      YAMAHA YZ 125 2016
      YAMAHA YZ 125 2015
      YAMAHA YZ 125 2014
      YAMAHA YZ 125 2013
      YAMAHA YZ 125 2012
      YAMAHA YZ 125 2011
      YAMAHA YZ 125 2010
      YAMAHA YZ 125 2009
      YAMAHA YZ 125 2008
      YAMAHA YZ 125 2007
      YAMAHA YZ 125 2006
      YAMAHA YZ 125 2005
      YAMAHA YZ 125 2004
      YAMAHA YZ 125 2003
      YAMAHA YZ 125 2002
      YAMAHA YZ 125 2001

      ATHENA
      MS220560160C4K
      15 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA engine bearing 22 × 56 × 16 mm for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R
      ATHENA engine bearing for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R, CRF 100 F and YAMAHA YZ 125 from 1980 to 2016
      ATHENA engine bearing 22 × 56 × 16 mm for HONDA CR 125 R, CR 80 R, CR 80 RB, CR 85 R
      €19.90
      Tax Included