• New
    PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 2002-2004
    PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 2002-2004

    PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 2002-2004

    Review (0)
    €108.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    PROX linkage bearing kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 from 2002 to 2004.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      The PROX 26.110133 linkage bearing kit is designed for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 from 2002 to 2004. The linkage connects the swingarm to the shock and works on every bump. Its needle bearings are exposed to water and mud: seized or rusty, they hold back the rear suspension and make the rear end harsh and vague.

      Specifications

      • Brand: PROX
      • Manufacturer part number: 26.110133
      • Weight: 560 g

      When to replace it?

      • Play at the rear when you lift the rear wheel.
      • Rear suspension that is harsh or squeaks.
      • Rusty needles, marked sleeves or black grease when opened.

      Take the linkage apart, clean it and grease it regularly, especially after rides in water or mud, and replace the bearings as soon as they bind or have play.

      Fitting tips

      1. Support the bike with the rear wheel off the ground and remove the linkage.
      2. Press out the old bearings, or pull them out with a puller, without damaging the bores.
      3. Press in the new bearings, straight, then fit the seals and the sleeves packed with waterproof grease.
      4. Refit the linkage and tighten the pivot bolts to the manual's torque.

      Why PROX?

      Founded in 1975 and based near Amsterdam, ProX specialises in engine and clutch wear parts for off-road bikes. The brand has most of its range made in Japan, by OEM suppliers, for quality on a par with the original parts.

      Spare parts and items to plan

      Frequently asked questions

      Should I do the swingarm at the same time?
      It is advisable: the swingarm bearings face the same conditions and are easy to do while you are in there.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 125 2004
      HUSQVARNA CR 125 2003
      HUSQVARNA CR 125 2002
      HUSQVARNA CR 250 2004
      HUSQVARNA CR 250 2003
      HUSQVARNA CR 250 2002
      HUSQVARNA WR 125 2004
      HUSQVARNA WR 125 2003
      HUSQVARNA WR 125 2002
      HUSQVARNA WR 250 2004
      HUSQVARNA WR 250 2003
      HUSQVARNA WR 250 2002
      HUSQVARNA WR 360 2002

      PROX
      26.110133
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 2002-2004
      PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 2002-2004
      PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 360 2002-2004
      €108.90
      Tax Included