• New
    PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 2005-2013
    PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 2005-2013

    PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 2005-2013

    Review (0)
    €106.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    PROX linkage bearing kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 from 2005 to 2013.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      The PROX 26.110146 linkage bearing kit is designed for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 from 2005 to 2013. The linkage connects the swingarm to the shock and works on every bump. Its needle bearings are exposed to water and mud: seized or rusty, they hold back the rear suspension and make the rear end harsh and vague.

      Specifications

      • Brand: PROX
      • Manufacturer part number: 26.110146

      When to replace it?

      • Play at the rear when you lift the rear wheel.
      • Rear suspension that is harsh or squeaks.
      • Rusty needles, marked sleeves or black grease when opened.

      Take the linkage apart, clean it and grease it regularly, especially after rides in water or mud, and replace the bearings as soon as they bind or have play.

      Fitting tips

      1. Support the bike with the rear wheel off the ground and remove the linkage.
      2. Press out the old bearings, or pull them out with a puller, without damaging the bores.
      3. Press in the new bearings, straight, then fit the seals and the sleeves packed with waterproof grease.
      4. Refit the linkage and tighten the pivot bolts to the manual's torque.

      Why PROX?

      Founded in 1975 and based near Amsterdam, ProX specialises in engine and clutch wear parts for off-road bikes. The brand has most of its range made in Japan, by OEM suppliers, for quality on a par with the original parts.

      Spare parts and items to plan

      Frequently asked questions

      Should I do the swingarm at the same time?
      It is advisable: the swingarm bearings face the same conditions and are easy to do while you are in there.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 125 2008
      HUSQVARNA CR 125 2007
      HUSQVARNA CR 125 2006
      HUSQVARNA CR 250 2013
      HUSQVARNA CR 250 2012
      HUSQVARNA CR 250 2011
      HUSQVARNA CR 250 2010
      HUSQVARNA CR 250 2009
      HUSQVARNA CR 250 2008
      HUSQVARNA CR 250 2007
      HUSQVARNA CR 250 2006
      HUSQVARNA CR 250 2005
      HUSQVARNA WR 125 2008
      HUSQVARNA WR 125 2007
      HUSQVARNA WR 125 2006
      HUSQVARNA WR 250 2013
      HUSQVARNA WR 250 2012
      HUSQVARNA WR 250 2011
      HUSQVARNA WR 250 2010
      HUSQVARNA WR 250 2009
      HUSQVARNA WR 250 2008
      HUSQVARNA WR 250 2007
      HUSQVARNA WR 250 2006
      HUSQVARNA WR 250 2005
      HUSQVARNA WR 300 2013
      HUSQVARNA WR 300 2012
      HUSQVARNA WR 300 2011
      HUSQVARNA WR 300 2010
      HUSQVARNA WR 300 2009

      PROX
      26.110146
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 2005-2013
      PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 2005-2013
      PROX Linkage Bearing Kit for HUSQVARNA CR 125, CR 250, WR 125, WR 250, WR 300 2005-2013
      €106.90
      Tax Included