PROX Linkage Bearing Kit for HONDA CRF 80 2004-2013

On HONDA CRF 80 from 2004 to 2013, the PROX 26.110091 linkage bearing kit fits in place of the original part. The linkage bearing kit restores the pivots of the rear suspension: bearings, seals and sleeves, depending on the part number. A linkage that turns freely means a shock that works the way it should.

Specifications

• Brand: PROX
• Manufacturer part number: 26.110091
• Weight: 240 g

When to replace it?

• Play at the rear when you lift the rear wheel.
• Rear suspension that is harsh or squeaks.
• Rusty needles, marked sleeves or black grease when opened.

Take the linkage apart, clean it and grease it regularly, especially after rides in water or mud, and replace the bearings as soon as they bind or have play.

Fitting tips

1. Support the bike with the rear wheel off the ground and remove the linkage.
2. Press out the old bearings, or pull them out with a puller, without damaging the bores.
3. Press in the new bearings, straight, then fit the seals and the sleeves packed with waterproof grease.
4. Refit the linkage and tighten the pivot bolts to the manual's torque.

Why PROX?

ProX Racing Parts has been supplying engine and clutch parts to motocross riders since 1975, from its headquarters near Amsterdam. According to its catalogue, most of its parts are made in Japan, by manufacturers that also produce parts for the Japanese motorcycle makers.

Spare parts and items to plan

• Swingarm bearings : ALL BALLS · PROX
• Grease : MOTUL 400 g

Frequently asked questions

Should I do the swingarm at the same time?
It is advisable: the swingarm bearings face the same conditions and are easy to do while you are in there.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CRF 80 2013
HONDA CRF 80 2012
HONDA CRF 80 2011
HONDA CRF 80 2010
HONDA CRF 80 2009
HONDA CRF 80 2008
HONDA CRF 80 2007
HONDA CRF 80 2006
HONDA CRF 80 2005
HONDA CRF 80 2004