INNTECK Linkage Bearing Kit for KAWASAKI KX 65 2000-2001

The INNTECK WY-27-1012 linkage bearing kit is designed for KAWASAKI KX 65 from 2000 to 2001. The linkage connects the swingarm to the shock and works on every bump. Its needle bearings are exposed to water and mud: seized or rusty, they hold back the rear suspension and make the rear end harsh and vague.

Specifications

• Brand: INNTECK
• Manufacturer part number: WY-27-1012

When to replace it?

• Play at the rear when you lift the rear wheel.
• Rear suspension that is harsh or squeaks.
• Rusty needles, marked sleeves or black grease when opened.

Take the linkage apart, clean it and grease it regularly, especially after rides in water or mud, and replace the bearings as soon as they bind or have play.

Fitting tips

1. Support the bike with the rear wheel off the ground and remove the linkage.
2. Press out the old bearings, or pull them out with a puller, without damaging the bores.
3. Press in the new bearings, straight, then fit the seals and the sleeves packed with waterproof grease.
4. Refit the linkage and tighten the pivot bolts to the manual's torque.

Spare parts and items to plan

• Swingarm bearings : PROX · PIVOT WORKS
• Grease : MOTUL 400 g

Frequently asked questions

Should I do the swingarm at the same time?
It is advisable: the swingarm bearings face the same conditions and are easy to do while you are in there.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
KAWASAKI KX 65 2001
KAWASAKI KX 65 2000