INNTECK Linkage Bearing Kit for KAWASAKI KX 80, KX 100 1991-1997

On KAWASAKI KX 80, KX 100 from 1991 to 1997, the INNTECK WY-27-1013 linkage bearing kit fits in place of the original part. The linkage bearing kit restores the pivots of the rear suspension: bearings, seals and sleeves, depending on the part number. A linkage that turns freely means a shock that works the way it should.

Specifications

• Brand: INNTECK
• Manufacturer part number: WY-27-1013

When to replace it?

• Play at the rear when you lift the rear wheel.
• Rear suspension that is harsh or squeaks.
• Rusty needles, marked sleeves or black grease when opened.

Take the linkage apart, clean it and grease it regularly, especially after rides in water or mud, and replace the bearings as soon as they bind or have play.

Fitting tips

1. Support the bike with the rear wheel off the ground and remove the linkage.
2. Press out the old bearings, or pull them out with a puller, without damaging the bores.
3. Press in the new bearings, straight, then fit the seals and the sleeves packed with waterproof grease.
4. Refit the linkage and tighten the pivot bolts to the manual's torque.

Spare parts and items to plan

• Swingarm bearings : PROX · PIVOT WORKS
• Grease : MOTUL 400 g

Frequently asked questions

Should I do the swingarm at the same time?
It is advisable: the swingarm bearings face the same conditions and are easy to do while you are in there.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
KAWASAKI KX 80 1997
KAWASAKI KX 80 1996
KAWASAKI KX 80 1995
KAWASAKI KX 80 1994
KAWASAKI KX 80 1993
KAWASAKI KX 80 1992
KAWASAKI KX 80 1991
KAWASAKI KX 100 1997
KAWASAKI KX 100 1996
KAWASAKI KX 100 1995