- New
PIVOT WORKS Suspension Linkage Repair Kit for YAMAHA WR 250, WR 500, YZ 125, YZ 250 1990-1993
€130.90
Tax Included
The bearings and bushes of the suspension linkage that connects the swingarm to the shock.
PIVOT WORKS offers this linkage rebuild kit for YAMAHA WR 250, WR 500, YZ 125, YZ 250 1990-1993. The linkage transfers swingarm movement to the shock. Its needle bearings, very exposed to water and mud, seize quickly if not greased.
Why rebuild the linkage?
The benefits:
- Get the rear suspension working freely again.
- Eliminate play and squeaks.
Why choose PIVOT WORKS?
Pivot Works kits, sold by the American All Balls Racing group, use hardened NTN, NSK or Koyo bearings from original-equipment bearing suppliers, supplied pre-greased with their seals; every kit carries the Pivot Works limited lifetime warranty.
When should you replace this part?
A tight spot, play when lifting the rear wheel or seized needles: the linkage needs rebuilding.
Specifications and fitting tips
- Manufacturer part number: PWLK-Y21-000
Cross-Mania tip: Clean the housings, grease generously with waterproof grease and tighten the bolts to the specified torque.
Also needed with this part
- Grease : MOTUL 400 g 108664 · MOTUL 400 g 108672
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA WR 250 1993
YAMAHA WR 250 1992
YAMAHA WR 250 1991
YAMAHA WR 500 1993
YAMAHA WR 500 1992
YAMAHA YZ 125 1992
YAMAHA YZ 125 1991
YAMAHA YZ 250 1992
YAMAHA YZ 250 1991
YAMAHA YZ 250 1990
PWLK-Y21-000
2 Items
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The bearings and bushes of the suspension linkage that connects the swingarm to the shock.
PIVOT WORKS Suspension Linkage Repair Kit for YAMAHA WR 250, WR 500, YZ 125, YZ 250 1990-1993
€130.90
Tax Included