• New
    HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
    HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
    HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
    HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
    HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007

    HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007

    Review (0)
    €30.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    The pin that links the connecting rod to the crankshaft: a crank rebuild part, to be pressed in by a properly equipped workshop.

    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      HOT RODS offers this crank pin for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007. The crankshaft of an off-road engine is often made of two flywheels joined by a pin, the crank pin.

      Why replace the crank pin?

      The benefits:

      • The crank pin wears along with the needle bearing: replacing it gives a big end with no play again.
      • An alternative to a complete crankshaft: you keep your original flywheels.
      • A healthy bottom end again, without vibration or knocking.

      Why choose HOT RODS?

      Hot Rods, the bottom-end specialist since 1993: crankshafts, rods, bearings and seals for a complete rebuild.

      When should you replace this part?

      Up-and-down play in the connecting rod at top dead centre, a marked, pitted or blued crank pin surface, a knock from the bottom end: rebuild the crank with a new crank pin.

      Specifications and fitting tips

      • Manufacturer part number: P147

      Cross-Mania tip: Have the crankshaft pressed and trued by a properly equipped workshop (press, V-blocks, dial gauge), replace the needle bearing and thrust washers at the same time, then check the connecting rod side play.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      POLARIS 300 1995
      POLARIS 300 1994
      POLARIS 300 6X6 1994
      POLARIS SCRAMBLER 250 1986
      POLARIS SCRAMBLER 250 1985
      POLARIS TRAIL BLAZER 250 2007
      POLARIS TRAIL BLAZER 250 2006
      POLARIS TRAIL BLAZER 250 2005
      POLARIS TRAIL BLAZER 250 2004
      POLARIS TRAIL BLAZER 250 2003
      POLARIS TRAIL BLAZER 250 2002
      POLARIS TRAIL BLAZER 250 2001
      POLARIS TRAIL BLAZER 250 2000
      POLARIS TRAIL BLAZER 250 1999
      POLARIS TRAIL BLAZER 250 1998
      POLARIS TRAIL BLAZER 250 1997
      POLARIS TRAIL BLAZER 250 1996
      POLARIS TRAIL BLAZER 250 1995
      POLARIS TRAIL BLAZER 250 1994
      POLARIS TRAIL BLAZER 250 1993
      POLARIS TRAIL BLAZER 250 1992
      POLARIS TRAIL BLAZER 250 1991
      POLARIS TRAIL BLAZER 250 1990
      POLARIS TRAIL BOSS 250 1999
      POLARIS TRAIL BOSS 250 1998
      POLARIS TRAIL BOSS 250 1997
      POLARIS TRAIL BOSS 250 1996
      POLARIS TRAIL BOSS 250 1995
      POLARIS TRAIL BOSS 250 1994
      POLARIS TRAIL BOSS 250 1993
      POLARIS TRAIL BOSS 250 1992
      POLARIS TRAIL BOSS 250 1991
      POLARIS TRAIL BOSS 250 1990
      POLARIS TRAIL BOSS 250 1989
      POLARIS TRAIL BOSS 250 1988
      POLARIS TRAIL BOSS 250 1987
      POLARIS TRAIL BOSS 250 1986
      POLARIS TRAIL BOSS 250 1985
      POLARIS XPLORER 300 1999
      POLARIS XPLORER 300 1998
      POLARIS XPLORER 300 1997
      POLARIS XPLORER 300 1996
      POLARIS XPRESS 300 1999

      HOT RODS
      P147
      4 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
      HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
      HOT RODS Hollow Crank Pin 25X56mm for POLARIS 300, SCRAMBLER 250, TRAIL BLAZER 250, TRAIL BOSS 250, XPLORER 300 1985-2007
      €30.90
      Tax Included