TECNIUM Starter - Kodiak 400 for YAMAHA YFM 350 BIG BEAR 4WD, YFM 350 WOLVERINE 2WD, YFM 400 BIG BEAR PRO 2WD 1996-2005

TECNIUM offers this starter motor for YAMAHA YFM 350 BIG BEAR 4WD, YFM 350 WOLVERINE 2WD, YFM 400 BIG BEAR PRO 2WD, YFM 400 KODIAK 4WD 1996-2005. When you press the button, the starter relay sends battery current to the starter motor. It spins very fast and turns the engine through a set of gears until the engine fires.

Why replace the starter motor?

The benefits:

• Get crisp starting back, even with a cold engine or after a water crossing.
• A complete starter motor bolts straight on, with no need to strip or repair the old one.
• Less strain on the battery, which is no longer drained by a struggling starter.

When should you replace this part?

A starter that turns slowly, groans or no longer turns at all is probably worn out.

Specifications and fitting tips

• OEM type starter
• Use with OEM beam
• Manufacturer part number: BIHR-PH110-YA07

Cross-Mania tip: Replace the O-ring and tighten the bolts to torque; check the battery and cables.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFM 350 BIG BEAR 4WD 1998
YAMAHA YFM 350 BIG BEAR 4WD 1997
YAMAHA YFM 350 BIG BEAR 4WD 1996
YAMAHA YFM 350 WOLVERINE 2WD 2001
YAMAHA YFM 350 WOLVERINE 2WD 2000
YAMAHA YFM 350 WOLVERINE 2WD 1999
YAMAHA YFM 350 WOLVERINE 2WD 1998
YAMAHA YFM 350 WOLVERINE 2WD 1997
YAMAHA YFM 350 WOLVERINE 2WD 1996
YAMAHA YFM 400 BIG BEAR PRO 2WD 2005
YAMAHA YFM 400 BIG BEAR PRO 2WD 2004
YAMAHA YFM 400 BIG BEAR PRO 2WD 2003
YAMAHA YFM 400 BIG BEAR PRO 2WD 2002
YAMAHA YFM 400 KODIAK 4WD 1999