RACETECH Plastic Kit (8 pieces) for HUSQVARNA FE 250, FE 350, TE 125, TE 250, TE 300 and HUSABERG FE 450, FE 501 2026

The RACETECH plastic kit is designed for HUSQVARNA FE 250, FE 350, TE 125, TE 250, TE 300 and HUSABERG FE 450, FE 501 2026. Plastics take a beating: branches, stones, crashes and pressure washing. A complete kit replaces them all in one go, shaped like the originals so they use the bike's existing mounting points.

Specifications

• Brand: RACETECH
• Manufacturer part numbers: R-KITHSQ-OEM-844, R-KITHSQ-NES-844
• Number of pieces: 8
• Fork guards included
• Headlight mask included
• Available versions: OEM colours: ref. R-KITHSQ-OEM-844; White: ref. R-KITHSQ-NES-844

Choosing the colour

All colours have the same shape and the same mounting points: pick the one that matches your bike (OEM colours) or your graphics.

When to replace it?

• Plastics cracked, broken or warped after a crash.
• Faded colours, whitened plastics or heavy scratching.
• Mounting holes enlarged or torn out: the parts rattle and no longer hold.
• You want a different colour, or want to get the bike ready before selling it.

Check the number of pieces and the list of items supplied: depending on the kit, the air box cover, fork guards or headlight mask are included or not. The bike's model year matters: plastics often change shape from one year to the next.

Fitting tips

1. Remove the seat and the fuel tank if necessary, then the old plastics, keeping all the hardware: it goes back on the new kit.
2. Clean the frame, the air box and the mounts before test-fitting the new parts.
3. Tighten without forcing: over-tightening cracks the plastic around the bolts. Replace damaged bolts with new plastics hardware.
4. If you are fitting a graphics kit, do it on clean, degreased plastics at room temperature.

Why RACETECH?

Racetech, now also sold under the Rtech name, is an Italian brand launched in 2002 by Cristian Mittone, a former professional enduro rider, and based in Premariacco, near Udine. Its catalogue runs to more than 5,000 parts in plastic, aluminium and rubber, from plastic kits to handguards and chain guides.

Spare parts and items to plan

• Fork guards : RACETECH R-PSHSQ · RACETECH R-PSHSQBN0020
• Plastics bolt kit : see the selection

Frequently asked questions

Can the original decals be stuck back on?
They can rarely be reused once peeled off. The shapes of replica plastics follow the originals, so you can fit a graphics kit made for your bike.

Do I need new bolts?
The original hardware can be refitted if it is in good condition. New hardware saves you from forcing on damaged heads.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSABERG FE 450 2026
HUSABERG FE 501 2026
HUSQVARNA FE 250 2026
HUSQVARNA FE 350 2026
HUSQVARNA TE 125 2026
HUSQVARNA TE 250 2026
HUSQVARNA TE 300 2026