INNTECK Complete Engine Gasket Kit for HUSQVARNA CR 250, WR 250, WR 300 1999-2009

On HUSQVARNA CR 250, WR 250, WR 300 from 1999 to 2009, the INNTECK 682A252FL complete engine gasket kit fits in place of the original part. A full engine rebuild calls for new gaskets wherever parts have been separated. This kit saves you ordering gaskets one by one and makes sure the engine goes back together perfectly sealed.

Specifications

• Brand: INNTECK
• Manufacturer part number: 682A252FL
• Engine: 2-stroke

When to replace it?

• Oil seeping at the crankcase or cover joints.
• Coolant or oil leak after the engine has been apart.
• Gaskets hardened, torn or stuck to the parts on disassembly.

During a complete engine rebuild (connecting rod, crankshaft bearings, gearbox) or whenever the crankcases are split.

Fitting tips

1. Clean all the gasket faces without scratching them and remove any remains of old gaskets.
2. Fit the gaskets dry, except where the workshop manual specifies sealant.
3. Replace the O-rings at the same time: a crushed O-ring can't be reused.
4. With the cases split, also replace the crankshaft bearings and oil seals and check the gearbox bearings.
5. Tighten the crankcases and covers in a criss-cross pattern to the manufacturer's torque, then fill up with oil and coolant.

Spare parts and items to plan

• Crankshaft bearings and seals : see the selection
• Engine oil seals : CENTAURO · PROX
• Gearbox bearings : see the selection
• 2-stroke oil : LIQUI MOLY 1 L · MOTUL 1 L
• Coolant : LIQUI MOLY 1 L · TWIN AIR
• Spark plug : NGK 3430 · NGK 3530

Frequently asked questions

Are the oil seals included?
The manufacturer does not say for this part number: compare with your original seals.

What does the kit contain?
Depends on the model. Compare with your original gaskets if in doubt.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA CR 250 1999
HUSQVARNA WR 250 1999
HUSQVARNA WR 300 2009