P.B.R. Hydraulic Clutch Conversion Kit for HUSQVARNA WR 300 2009-2013

The P.B.R. 611120119 hydraulic clutch conversion kit is designed for HUSQVARNA WR 300 from 2009 to 2013. This kit replaces the cable-operated clutch with a hydraulic one. The engagement point stays the same throughout the ride, the lever is lighter and there's no more cable to adjust or lubricate.

Specifications

• Brand: P.B.R.
• Manufacturer part number: 611120119
• Weight: 150 g
• Engine: 2-stroke

Who is it for?

• Cable that stretches and an engagement point that changes during the ride.
• Lever effort that tires your forearm.
• Cables that keep breaking or sticking.

Good to know

A hydraulic system is bled and checked like a brake: check the fluid level and look for leaks regularly.

Fitting tips

1. Follow the kit instructions for routing the hoses, with no pinching or rubbing.
2. Fill and bleed the system with the fluid specified by the kit manufacturer.
3. Set the free play at the lever and check that the clutch disengages properly with the engine warm.

Spare parts and items to plan

• Brake and clutch fluid : MOTUL 1 L · MOTUL 5 L

Frequently asked questions

Which fluid should I use?
Only the one specified by the kit manufacturer (mineral oil or DOT fluid depending on the system). Never mix the two.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA WR 300 2013
HUSQVARNA WR 300 2012
HUSQVARNA WR 300 2011
HUSQVARNA WR 300 2010
HUSQVARNA WR 300 2009