- New
Clutch spring KIT for '08-09 BARNETT for YAMAHA YFM 250 RAPTOR 2WD 2008-2013
€29.90
Tax Included
The springs that clamp the clutch plates so power gets through without slipping.
BARNETT offers these clutch springs for YAMAHA YFM 250 RAPTOR 2WD 2008-2013. The springs push on the pressure plate to clamp the plates together. With heat they lose strength and the clutch starts to slip.
Why replace the clutch springs?
The benefits:
- Stop slipping, especially under acceleration.
- Get a positive clutch back.
- Heavy-duty springs exist for tuned engines (slightly heavier lever).
Why choose BARNETT?
Barnett, an American manufacturer since 1948: clutch springs about 10-15 % stiffer than stock, shot-peened and heat-treated, for a clutch that no longer slips.
When should you replace the clutch springs on your YAMAHA YFM 250 RAPTOR 2WD?
Measure the friction plate thickness and the spring free length: below the manufacturer's minimum they must be replaced. Blued or warped steel plates are replaced too.
Specifications and fitting tips
- Manufacturer part number: 501-58-05045
Cross-Mania tip: Soak the friction plates in gearbox oil before fitting, check the basket for notches and replace the springs at the same time.
Also needed with this part
- Gearbox oil : LIQUI MOLY 10W30 1 L · MOTUL 10W40 1 L
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA YFM 250 RAPTOR 2WD 2013
YAMAHA YFM 250 RAPTOR 2WD 2012
YAMAHA YFM 250 RAPTOR 2WD 2011
YAMAHA YFM 250 RAPTOR 2WD 2010
YAMAHA YFM 250 RAPTOR 2WD 2009
YAMAHA YFM 250 RAPTOR 2WD 2008
501-58-05045
1 Item
Specific References
No customer reviews for the moment.
The springs that clamp the clutch plates so power gets through without slipping.