- New
Clutch spring KIT for XT, TT, TT600R 84-88 BARNETT for YAMAHA TT 600, XT 600 1984-1988
€23.90
Tax Included
The springs that clamp the clutch plates so power gets through without slipping.
BARNETT offers these clutch springs for YAMAHA TT 600, XT 600 1984-1988. The springs push on the pressure plate to clamp the plates together. With heat they lose strength and the clutch starts to slip.
Why replace the clutch springs?
The benefits:
- Stop slipping, especially under acceleration.
- Get a positive clutch back.
- Heavy-duty springs exist for tuned engines (slightly heavier lever).
Why choose BARNETT?
Barnett, an American manufacturer since 1948: clutch springs about 10-15 % stiffer than stock, shot-peened and heat-treated, for a clutch that no longer slips.
When should you replace the clutch springs on your YAMAHA XT 600?
Measure the friction plate thickness and the spring free length: below the manufacturer's minimum they must be replaced. Blued or warped steel plates are replaced too.
Specifications and fitting tips
- Manufacturer part number: 501-66-05041
Cross-Mania tip: Soak the friction plates in gearbox oil before fitting, check the basket for notches and replace the springs at the same time.
Also needed with this part
- Clutch plates : TECNIUM · NEWFREN
- Clutch cover gasket : ATHENA · CENTAURO
- 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50
- Gearbox oil : LIQUI MOLY 10W30 1 L · LIQUI MOLY 1 L
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA TT 600 1988
YAMAHA TT 600 1987
YAMAHA TT 600 1986
YAMAHA TT 600 1985
YAMAHA XT 600 1988
YAMAHA XT 600 1987
YAMAHA XT 600 1986
YAMAHA XT 600 1985
YAMAHA XT 600 1984
501-66-05041
3 Items
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The springs that clamp the clutch plates so power gets through without slipping.