Clutch SPRING KIT BARNETT for SUZUKI RMZ 250 and HONDA CRF 250, CRF 250 RX ENDURO 2010-2026

BARNETT offers these clutch springs for SUZUKI RMZ 250 and HONDA CRF 250, CRF 250 RX ENDURO 2010-2026. The springs push on the pressure plate to clamp the plates together. With heat they lose strength and the clutch starts to slip.

Why replace the clutch springs?

The benefits:

• Stop slipping, especially under acceleration.
• Get a positive clutch back.
• Heavy-duty springs exist for tuned engines (slightly heavier lever).

Why choose BARNETT?

Barnett, an American manufacturer since 1948: clutch springs about 10-15 % stiffer than stock, shot-peened and heat-treated, for a clutch that no longer slips.

When should you replace the clutch springs?

Measure the friction plate thickness and the spring free length: below the manufacturer's minimum they must be replaced. Blued or warped steel plates are replaced too.

Specifications and fitting tips

• Manufacturer part number: 501-30-05135

Cross-Mania tip: Soak the friction plates in gearbox oil before fitting, check the basket for notches and replace the springs at the same time.

Also needed with this part

• Clutch plates : PROX · HINSON
• Clutch cover gasket : PROX · MOOSE
• 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50
• Gearbox oil : LIQUI MOLY 10W30 1 L · LIQUI MOLY 500 ml

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CRF 250 2021
HONDA CRF 250 2020
HONDA CRF 250 2019
HONDA CRF 250 2018
HONDA CRF 250 2017
HONDA CRF 250 2016
HONDA CRF 250 2015
HONDA CRF 250 2014
HONDA CRF 250 RX ENDURO 2021
HONDA CRF 250 RX ENDURO 2020
HONDA CRF 250 RX ENDURO 2019
SUZUKI RMZ 250 2026
SUZUKI RMZ 250 2025
SUZUKI RMZ 250 2024
SUZUKI RMZ 250 2023
SUZUKI RMZ 250 2022
SUZUKI RMZ 250 2021
SUZUKI RMZ 250 2020
SUZUKI RMZ 250 2019
SUZUKI RMZ 250 2018
SUZUKI RMZ 250 2017
SUZUKI RMZ 250 2016
SUZUKI RMZ 250 2015
SUZUKI RMZ 250 2014
SUZUKI RMZ 250 2013
SUZUKI RMZ 250 2012
SUZUKI RMZ 250 2011
SUZUKI RMZ 250 2010