- New
BARNETT clutch springs for HUSQVARNA CR 250, TE 510, WR 250 1985-1990
€27.90
Tax Included
The springs that clamp the clutch plates so power gets through without slipping.
BARNETT offers these clutch springs for HUSQVARNA CR 250, TE 510, WR 250 1985-1990. The springs push on the pressure plate to clamp the plates together. With heat they lose strength and the clutch starts to slip.
Why replace the clutch springs?
The benefits:
- Stop slipping, especially under acceleration.
- Get a positive clutch back.
- Heavy-duty springs exist for tuned engines (slightly heavier lever).
Why choose BARNETT?
Barnett, an American manufacturer since 1948: clutch springs about 10-15 % stiffer than stock, shot-peened and heat-treated, for a clutch that no longer slips.
When should you replace the clutch springs on your HUSQVARNA TE 510?
Measure the friction plate thickness and the spring free length: below the manufacturer's minimum they must be replaced. Blued or warped steel plates are replaced too.
Specifications and fitting tips
- Manufacturer part number: 501-95-05030
Cross-Mania tip: Soak the friction plates in gearbox oil before fitting, check the basket for notches and replace the springs at the same time.
Also needed with this part
- Clutch plates : PROX · NEWFREN
- Clutch cover gasket : see the selection
- 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50
- Gearbox oil : LIQUI MOLY 10W30 1 L · LIQUI MOLY 1 L
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
HUSQVARNA CR 250 1986
HUSQVARNA CR 250 1985
HUSQVARNA TE 510 1990
HUSQVARNA TE 510 1989
HUSQVARNA TE 510 1988
HUSQVARNA TE 510 1987
HUSQVARNA WR 250 1986
HUSQVARNA WR 250 1985
501-95-05030
8 Items
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The springs that clamp the clutch plates so power gets through without slipping.
BARNETT clutch springs for HUSQVARNA CR 250, TE 510, WR 250 1985-1990
€27.90
Tax Included