- New
BARNETT Clutch Spring Kit for HONDA TRX 400 EX SPORTRAX 2WD 1999-2008
€27.90
Tax Included
The springs that clamp the clutch plates so power gets through without slipping.
BARNETT offers these clutch springs for HONDA TRX 400 EX SPORTRAX 2WD 1999-2008. The springs push on the pressure plate to clamp the plates together. With heat they lose strength and the clutch starts to slip.
Why replace the clutch springs?
The benefits:
- Stop slipping, especially under acceleration.
- Get a positive clutch back.
- Heavy-duty springs exist for tuned engines (slightly heavier lever).
Why choose BARNETT?
Barnett, an American manufacturer since 1948: clutch springs about 10-15 % stiffer than stock, shot-peened and heat-treated, for a clutch that no longer slips.
When should you replace the clutch springs on your HONDA TRX 400 EX SPORTRAX 2WD?
Measure the friction plate thickness and the spring free length: below the manufacturer's minimum they must be replaced. Blued or warped steel plates are replaced too.
Specifications and fitting tips
- Manufacturer part number: 501-61-05079
Cross-Mania tip: Soak the friction plates in gearbox oil before fitting, check the basket for notches and replace the springs at the same time.
Also needed with this part
- Gearbox oil : LIQUI MOLY 10W30 1 L · LIQUI MOLY 80W 500 ml
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
HONDA TRX 400 EX SPORTRAX 2WD 2008
HONDA TRX 400 EX SPORTRAX 2WD 2007
HONDA TRX 400 EX SPORTRAX 2WD 2006
HONDA TRX 400 EX SPORTRAX 2WD 2005
HONDA TRX 400 EX SPORTRAX 2WD 2004
HONDA TRX 400 EX SPORTRAX 2WD 2003
HONDA TRX 400 EX SPORTRAX 2WD 2002
HONDA TRX 400 EX SPORTRAX 2WD 2001
HONDA TRX 400 EX SPORTRAX 2WD 2000
HONDA TRX 400 EX SPORTRAX 2WD 1999
501-61-05079
5 Items
Specific References
No customer reviews for the moment.
The springs that clamp the clutch plates so power gets through without slipping.
BARNETT Clutch Spring Kit for HONDA TRX 400 EX SPORTRAX 2WD 1999-2008
€27.90
Tax Included