• New
    PROX Clutch Friction Plate Kit for YAMAHA YZ 80 1983-1992
    PROX Clutch Friction Plate Kit for YAMAHA YZ 80 1983-1992

    PROX Clutch Friction Plate Kit for YAMAHA YZ 80 1983-1992

    Review (0)
    €56.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    PROX clutch friction plate kit for YAMAHA YZ 80 from 1983 to 1992.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      On YAMAHA YZ 80 from 1983 to 1992, the PROX 16.S21001 clutch friction plate kit fits in place of the original part. Every start and every hard acceleration wears the clutch linings a little. New friction plates give you back a clutch that holds the torque and bites cleanly at the lever.

      Specifications

      • Brand: PROX
      • Manufacturer part number: 16.S21001
      • Weight: 190 g
      • Engine: 2-stroke

      When to replace it?

      • Revs rise but the bike doesn't pick up speed (slipping), especially in the higher gears.
      • Engagement point that wanders, clutch that judders or smells burnt.
      • Plates below the minimum thickness given in the manual.

      Measure plate thickness with a vernier caliper at every clutch check and replace the plates once they're below the minimum in the manual, or as soon as they slip.

      Fitting tips

      1. Soak the new friction plates in gearbox oil before fitting them.
      2. Check the steel plates (flatness, blueing) and the clutch springs; replace them if necessary.
      3. Make sure the basket fingers aren't notched: if they are, the clutch will snag.
      4. Reassemble in the original order, tighten to the manufacturer's torque and close up with a new clutch cover gasket.

      Why PROX?

      ProX Racing Parts has been supplying engine and clutch parts to motocross riders since 1975, from its headquarters near Amsterdam. According to its catalogue, most of its parts are made in Japan, by manufacturers that also produce parts for the Japanese motorcycle makers.

      Spare parts and items to plan

      Frequently asked questions

      Should the steel plates be replaced at the same time?
      If they're blued, warped or marked, yes: fit new steel plates. If not, check them and keep them.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA YZ 80 1992
      YAMAHA YZ 80 1991
      YAMAHA YZ 80 1990
      YAMAHA YZ 80 1989
      YAMAHA YZ 80 1988
      YAMAHA YZ 80 1987
      YAMAHA YZ 80 1986
      YAMAHA YZ 80 1985
      YAMAHA YZ 80 1984
      YAMAHA YZ 80 1983

      PROX
      16.S21001

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Clutch Friction Plate Kit for YAMAHA YZ 80 1983-1992
      PROX Clutch Friction Plate Kit for YAMAHA YZ 80 1983-1992
      PROX Clutch Friction Plate Kit for YAMAHA YZ 80 1983-1992
      €56.90
      Tax Included