• New
    PROX Clutch Friction Plate Kit for HONDA CR 80, CR 85 1987-2004
    PROX Clutch Friction Plate Kit for HONDA CR 80, CR 85 1987-2004

    PROX Clutch Friction Plate Kit for HONDA CR 80, CR 85 1987-2004

    Review (0)
    €59.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    PROX clutch friction plate kit for HONDA CR 80, CR 85 from 1987 to 2004.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      On HONDA CR 80, CR 85 from 1987 to 2004, the PROX 16.S11001 clutch friction plate kit fits in place of the original part. Every start and every hard acceleration wears the clutch linings a little. New friction plates give you back a clutch that holds the torque and bites cleanly at the lever.

      Specifications

      • Brand: PROX
      • Manufacturer part number: 16.S11001
      • Weight: 170 g
      • Engine: 2-stroke

      When to replace it?

      • Revs rise but the bike doesn't pick up speed (slipping), especially in the higher gears.
      • Engagement point that wanders, clutch that judders or smells burnt.
      • Plates below the minimum thickness given in the manual.

      Measure plate thickness with a vernier caliper at every clutch check and replace the plates once they're below the minimum in the manual, or as soon as they slip.

      Fitting tips

      1. Soak the new friction plates in gearbox oil before fitting them.
      2. Check the steel plates (flatness, blueing) and the clutch springs; replace them if necessary.
      3. Make sure the basket fingers aren't notched: if they are, the clutch will snag.
      4. Reassemble in the original order, tighten to the manufacturer's torque and close up with a new clutch cover gasket.

      Why PROX?

      ProX Racing Parts has been supplying engine and clutch parts to motocross riders since 1975, from its headquarters near Amsterdam. According to its catalogue, most of its parts are made in Japan, by manufacturers that also produce parts for the Japanese motorcycle makers.

      Spare parts and items to plan

      Frequently asked questions

      Should the steel plates be replaced at the same time?
      If they're blued, warped or marked, yes: fit new steel plates. If not, check them and keep them.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA CR 80 2002
      HONDA CR 80 2001
      HONDA CR 80 2000
      HONDA CR 80 1999
      HONDA CR 80 1998
      HONDA CR 80 1997
      HONDA CR 80 1996
      HONDA CR 80 1995
      HONDA CR 80 1994
      HONDA CR 80 1993
      HONDA CR 80 1992
      HONDA CR 80 1991
      HONDA CR 80 1990
      HONDA CR 80 1989
      HONDA CR 80 1988
      HONDA CR 80 1987
      HONDA CR 85 2004
      HONDA CR 85 2003

      PROX
      16.S11001

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Clutch Friction Plate Kit for HONDA CR 80, CR 85 1987-2004
      PROX Clutch Friction Plate Kit for HONDA CR 80, CR 85 1987-2004
      PROX Clutch Friction Plate Kit for HONDA CR 80, CR 85 1987-2004
      €59.90
      Tax Included