LA SLEEVE cylinder sleeve for HONDA XR 650 R from 2000 to 2007

LA SLEEVE offers this cylinder sleeve for HONDA XR 650 R from 2000 to 2007. The sleeve is the wall the piston moves up and down in. When it is worn or scored, it can be replaced in the original cylinder instead of buying a complete cylinder.

Why re-sleeve a cylinder?

The benefits:

• Save a cylinder that is scored or worn beyond its last oversize.
• Cast iron allows several rebores later: an oversize piston can be fitted at the next rebuilds.
• Often cheaper than a new cylinder.

Why choose LA SLEEVE?

L.A. Sleeve has been sleeving cylinders since 1945: its sleeves are centrifugally cast from a chrome-molybdenum alloy, hard and wear-resistant.

When should you replace the cylinder on your HONDA XR 650 R?

A scored or oval cylinder, or one with damaged plating, loses compression and wears the piston quickly. Measure the bore at every top-end rebuild: beyond the wear limit the cylinder must be replaced or resleeved.

Specifications and fitting tips

• Bore: 100.00 mm
• Displacement: 649 cm³
• Material: Chromoly steel
• Engine: 4-stroke
• Quality cylinder sleeves to bring old cylinders back to life
• Centerless-ground outside diameter for perfect roundness

Cross-Mania tip: Check the diameter of the supplied or required piston and replace the top-end gaskets. A big bore may require carburation or fuel-injection adjustment.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA XR 650 R 2007
HONDA XR 650 R 2006
HONDA XR 650 R 2005
HONDA XR 650 R 2004
HONDA XR 650 R 2003
HONDA XR 650 R 2002
HONDA XR 650 R 2001
HONDA XR 650 R 2000