INNTECK Chain Guide - Black for HONDA CRF 150 2007-2019

The INNTECK CG1006 chain guide is designed for HONDA CRF 150 from 2007 to 2019. The chain guide, mounted under the swingarm in front of the rear sprocket, keeps the chain properly lined up. It stops the chain from coming off when the suspension is working or when a rock or a rut knocks it sideways: without it, the chain can jam and lock the wheel.

Specifications

• Brand: INNTECK
• Manufacturer part number: CG1006
• Engine: 4-stroke

When to replace it?

• Wear pad grooved by the chain, almost worn through or cracked.
• Guide bent or broken after an impact.
• Chain rubbing on the side plates instead of running through the centre.

Check it every time you wash the bike: a pad worn down to the metal wears the chain, and a bent guide can throw the chain off.

Fitting tips

1. Remove the old guide and clean the mounting points on the swingarm.
2. Offer up the new guide and check that the chain runs through the centre without touching the side plates.
3. Tighten the bolts to the manufacturer's torque, with medium-strength threadlocker.
4. Spin the wheel to check the alignment, then set the chain tension.

Spare parts and items to plan

• Drive chain : AFAM A420MX2-G · AFAM A520MR2-G 1
• Rear sprocket : MOTO-MASTER · MOTO-MASTER 7075

Frequently asked questions

Can the wear pad be replaced?
On two-piece guides, yes: you just change the pad when it's worn.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CRF 150 2019
HONDA CRF 150 2018
HONDA CRF 150 2017
HONDA CRF 150 2016
HONDA CRF 150 2015
HONDA CRF 150 2014
HONDA CRF 150 2013
HONDA CRF 150 2012
HONDA CRF 150 2011
HONDA CRF 150 2010
HONDA CRF 150 2009
HONDA CRF 150 2008
HONDA CRF 150 2007